High Torque Machine Modernization Geared Motor For Lift Parts
An elevator geared motor is a critical component in traction elevator systems, responsible
for converting electrical energy into mechanical motion to drive
the elevator car. Unlike gearless motors, which are typically used
in high-speed elevators, geared motors incorporate a reduction
gearbox to optimize torque and control speed. These motors are
commonly found in mid-rise buildings where a balance between
performance and cost is essential.
1. Modernization Motor(Elevator traction machine)
2. Speed from 1.0m/s to 2.5m/s
3. Elevator modernisation project to replace old asynchronous
machine
4. Low noise, low vibration, smooth running
Features
1. Double support design, reliable mechanical structure with high
shaft load;
2. High torque density with high efficiency;
3. Optimized design for winding, lower harmonics, lower noise, low
vibration, smooth running;
4. Advanced heat dissipation design, low temperature rise.
Specifications
| Traction Machine Parameter | Brake Parameter |
| Voltage | AC380V | Brake Model | BLB |
| Roping | 1:1 | Ins. Class | F |
| Wrap | Single | Voltage | DC110V |
| Capacity | 1000kg ~ 1250kg | Current | 1.98A |
| Speed | 1.0m/s ~ 2.5m/s | | |
| Protection Grade | IP41 | | |
| Ins. Class | F | | |
| Traction machine pole | 30 | | |
| Starts per hour | 240 times per hour | | |
| Rating | S5-40% | | |
| Elevator Height | ≤120m | | |
DIMENSION DRAWING
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements.
Configuration is not only for wire rope and rated load, but also
considered the size of the traction, as a result, the tensile
strength of wire rope is greater than the weight of the lift. The
safety factor is equipped with more than four wire rope. So it
won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator
running?
If it occurs, the elevator will automatically stop due to the
electrical and mechanical safety device. In case of power
failure,elevator brakes will automatically taken. In addition, the
power supply departments such as planned outage, prior notice are
also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of
elevator will automatically restart without any danger. With anti
clamping switch, once the gate touched, this switching action make
the elevator unable to be closed and even reopened. In addition,
closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the
(tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily
proportional to the operation complexity. Therefore, escalators
designed by us apply an integrated structure, so that the equipment
is more precise and more efficient and allows easier and more
convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.
