The manual sealants waterproofing machine uses foreign motor rather than cylinder to regulate the machine operating. The waterproofing gun and mixer square measure used renowned whole in China. The waterproofing machine continuously use the turned table along to coat glass by employees.
The two-component glue applier consists of A and B glue pumps, gas system, lifting mechanism, frame, etc. currently we have a tendency to might introduced those components of sealants waterproofing machine as follows:
1. Glue pump:
(1) A glue pump is ready for every of parts A and B, that square
measure driven by their individual air motors to create a
reciprocal motion to suck in and obtrude the glue. The glue pumps A
and B square measure mounted at the side of the pressure glue
plate, then connected with the frame to make their systems.
(2) The magnitude relation of A and B parts is adjusted by a
proportional lever: inward adjustment, B glue output decreases,
outward adjustment, B glue output will increase. By adjusting the
proportional lever to regulate the number of glue B, to regulate
the magnitude relation of A and B glue.
(3) Glue output: controlled by the air supply processor,
counterclockwise adjustment, the glue output will increase, and
clockwise adjusts the glue output to decrease. (Here refers to the
full quantity of glue) The glue pump adjusts the magnitude relation
of the glue quantity of A and B through a proportional lever, that
has the characteristics of versatile operation, stable performance,
and huge adjustment vary.
2. Lifting mechanism: A and B element rubber pumps square measure
severally equipped with a group of the gas lifting mechanism, that
consists of 2 cylinders in parallel, and also the individual pump
bodies square measure fixedly connected by a beam. one in all the
needs is to use the force of the 2 cylinders to the rubber surface
through the pressure plate, and also the pressure is adjusted by
the provider of the pressure control valve, usually adjusted to
regarding zero.3MPa; second, once the rubber barrel has to get
replaced, The cylinder will carry the pressure plate. Leave the
plastic bucket so it may be replaced with a brand new one.
