3-5 Gallon Bottle Decapping and Washing Machine With Checking
Window
Principle of this Gallon washer:
This machine is mainly use for washing the recycle empty 3-5gallon
bottles in the 3-5 gallon barreled water filling line, it is for
clean the impurity,deposition and algae etc,it also equipts
decapping device.
Worker put used jar in right side of de-capper position, with the
neck inserting into the hole, worker foot press pedal to release
cap off neck; And then worker need to take the jar to insert into
left side of the machine-washing position. After the jar putting
in, the window need to be closed. Then the washer will be started
by itself. During washing, the inner brush inside jar and Washing
time is pre-settled, the machine will stop when time finish.
Heating function could be switched on/ off as customer's
requirements.
| Capacity | 250BPH |
| Brushes | 8 |
| Barrel size | 3-5gallon(10-20L)(270×490×56) |
| Air pressure | 0.5MPa |
| Water consumption | 0.01t/h |
| Power | 1.12KW without heating function, 2.12KW with heating function |
| Outline dimensions | 800*750*1200mm |
| Weight | 120KG |
1. summarize
BS-1 pulling-washing bottle machine is auxiliary machine of QGF
bottle
production line. This machine set washing, pulling in a body, to
wash
whole bottle without dead angle, the cap has been pulled without
damage and can be use again. This machine with compact structure,
just
need one worker, to washing-pulling bottles at least 200.
2. Technology parameter
1. 1pc pulling cap
2. 8pcs washing brush
3. Pneumatic component : 1pc 75*80 tank and 1pc pulling cap pedal
4. Dimension: 800*1000*800mm
5. Power supply: 800V
6. Washing pump: 0.37KW
7. Motor power: 0.75KW
3. Working process
Put the empty bottleneck into the pedal and pull the cap and Put
the
barrel in flushing base, 1 arrow above cover plate, blunt begin
automatically flush work, open the cover plate is flush to stop,
then Put
the empty into the washing box with brush, close the cover plate,
brush
2barrels began to work, open the stop,Take out the bottle around 10
seconds, a process is over.
Checking the power supply and air pressure before turn on the
machine,
motor steering right or not, if not, please use machine after
excluding
the malfunction.
The details of this Gallon de-capping and washing machine:
