W01-358-7011 Firestone Air Bags 3/4 NPT Air Fitting For Self Aligning Device

W01-358-7011 Firestone Air Bags 3/4 NPT Air Fitting For SELF ALIGNING DEVICE

AIRSUSTECH 1B7011 product description:

The air spring shock absorber AIRSUSTECH 1B7011 Replace W01-358-7011 Firestone Air Bags can only push the bellows towards the workpiece, otherwise it must be equipped with a stroke limiter at the end of the stroke, otherwise the bellows will be overloaded

• In order to press the air spring shock absorber AIRSUSTECH 1B7011 Replace W01-358-7011 Firestone Air Bags to the minimum height, a restoring force is required. Usually, this is achieved by applying a load

• The entire bearing surface of the upper and lower plates of the air spring shock absorber AIRSUSTECH 1B7011 Replace W01-358-7011 Firestone Air Bags must be used to absorb the force

• Before disassembling the air spring shock absorber AIRSUSTECH 1B7011 Replace W01-358-7011 Firestone Air Bags, the internal air must be released to prevent accidents and personal injury.

• During operation, the rubber air spring shock absorber AIRSUSTECH 1B7011 Replace W01-358-7011 Firestone Air Bags shall not be in contact with other parts

AIRSUSTECH 1B7011 Cross OEM Original Equipment Manufacturer:

AIRSUSTECH Part Number:1B7011

Firestone Order Number: W01-358-7011/

Firestone Order Number:WO13587011/

Firestone Order Number:WO1-358-7011/

Firestone Order Number:W013587011/

Firestone Order Number:W01 358 7008

Firestone Part Number:W01-358-7011/

Firestone Part Number:WO13587011/

Firestone Part Number:WO1-358-7011/

Firestone Part Number:W013587011/

Firestone Part Number:W01 358 7008

Firestone Bellows Number: 19

Contitech Part Number:FS 330-11 CI 3/4 NPT OS

​Contitech Part Number:FS330-11 CI 3/4 NPT OS

​Contitech Part Number:FS 330-11CI 3/4 NPT OS

Contitech Part Number:FS 330-11 CI 3/4 NPT

​Contitech Part Number:FS330-11 CI 3/4 NPT

​Contitech Part Number:FS 330-11CI 3/4 NPT

Goodyear Part Number:1B12-300 /

Goodyear Part Number:1B12 300 /

Goodyear Part Number:1B12300 /

Goodyear Part Number:1B12-313

Goodyear Part Number:1B12 313

Goodyear Part Number:1B12313

Goodyear Bellows Number:578-91-3-301 /

Goodyear Bellows Number:578 91 3 301 /

Goodyear Bellows Number:578913301

Triangle Part Number:4474

Triangle Bellows Number:6374

Holland (Neway) Number:905-57-226

Maximum diameter @ 100 PSIG (inch)
12.9
Maximum height (inch)
5.5
Maximum stroke (inch)
3.5
Minimum usable height (inches)
2
Force at 1 inch (lb) stroke @ 80PSI
6720
Force at a stroke of 3 inches (lbs) @ 80PSI
3730
Force at maximum stroke @ 80PSI (pounds)
2630
Style cross reference extended height (similar end closure) style number
19-.75
Material
2-layer standard line
End cap details
Bead plate type
3
Blind nut center (inch)
6.2
Port offset of blind hole nut centerline (inches)
2.88
Air isolator
Design height
5
Load (at design height): 40 psig (lbs)
1690
Load (at design height): 60 psig (lbs)
2640
Load (at design height): 80 psig (lbs)
3730
Natural frequency (@80 psig) (cpm)
168
Isolation percentage at mandatory frequency 400 CPM
78.6
Isolation percentage at mandatory frequency 800 CPM
95.4
Isolation percentage at mandatory frequency 1500 CPM
98.7

AIRSUSTECH 1B7011 can use For SELF ALIGNING DEVICE

Application of air spring in self-aligning device:

The self-aligning device assembly includes an actuator for causing forward and backward translation. The actuator includes a motor and a screw with a longitudinal axis, and the motor drives the screw to rotate around the longitudinal axis. The assembly includes a pivot nut assembly, The pivot nut assembly is adapted to travel forward and backward substantially along an axis that is the same or substantially parallel to the longitudinal axis. The pivot nut assembly includes: a bracket operatively coupled with an inner tube or an outer tube to respond The operation of the motor causes the forward or backward translation of the inner tube; and a nut, which is assembled on the bracket and is adapted to pivot on an axis substantially transverse to the longitudinal axis.

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

AIRSUSTECH is another brand of Guangzhou Guomat Air Spring Co., Ltd. 

AIRSUSTECH is focus on industrial air spring.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.