0.15mm Anti Static High Temperature Masking Tape For Components
Anti-Static High Temperature Masking Crepe Tape E1-MH310G Masking
for Components and Temporary Holding
E1-MH310G is anti-static tape based with crepe paper with high
temperature resistant.
Features And Benefits:
1. Low electrostatic discharge at unwind.
2. Resistant high temperature up to 260℃.
3. RoHS Compliant.
4. No residue after removal.
Properties:
| Item high temp masking tape | Typical Value |
| Total Thickness | 0.15±0.01mm |
| Adhesion to Steel | ≥4N/25mm |
| Tensile Strength |  |
| Elongation |
| Surface Resistance | 106~10ohms |
| Operating Temperature | 260℃ |
| Static Discharge | <100V |
Construction:
Application:
Masking for thermosensitive components of Print Circuit Boards and
temporary holding in wave soldering or reflow soldering process.
Storage
1. Store under normal conditions of 10-30℃ and 40-70% R.H, out of
direct sunlight.
2. Shelf life: 12 months from the date of manufacture when stored
in initial packing.
Precaution Reminder:
1. Surface should be clean, dry, free of dust, oil or other
contaminants.
2. Proper pressure required by roller, hand or press when applying.
3. Avoid repeat sticking to prevent adhesion decrease.
Why buy from us instead of buying from other suppliers?
1. Good location and convenient transportation.
2. SGS certification.
What are our advantages?
1. Professional tape manufacturer for nearly 20 years.
2. Gold supplier.
3. Provide samples and best service.
Notes:
Please be advised that this technical data sheet is written based
on our lab tests and experience only. Customer is responsible to
determine the suitability of the product meets intended application
requirements before approved for use.
