3.5mil Heat Resistant Kapton Polyimide Tape Masking ESD Silicone
3.5mils heat resistant ESD silicone polyemide tape E1-IH807J
polyimide heat resistant adhesive tape with good heating resistance
E1-IH807J is a polyimide film-backed silicone adhesive polyimide
tape which has ils thickness with good adhesion ,also low
electrostatic discharge properties.
Features And Benefits:
1. Low electrostatic discharge at unwind and removal.
2. Resistant high temperature up to 270℃.
3. Excellent tensile strength & Elongation.
Die-cutting and formed any shape for general masking.
4. RoHS Compliant.
Application:
Masking for golden finger of Print circuit boards when wave
soldering or reflow soldering process, surface protection under the
high temperature without any residue.
Polyimide Adhesive Tape Properties:
| Product | Units | Test values |
| Backing Thickness: | mm | 0.075 |
| Total Tape Thickness: | mm | 0.09±0.005 |
| Adhesion to Steel: | N/25mm | 3~4N |
| Tensile Strength at Break: | KN/M | ≥8 |
| Elongation at Break: | % | ≥50% |
| Upmost Temperature | ° C | 270 |
| Surface Resistance | ohms | 105~9ohms |
| Static Discharge(Removal from roll) | Voltage | <100V |
Construction:
Storage:
1. Store under normal conditions of 10-30℃ and 40-70% R.H, out of
direct sunlight.
2. Shelf life: 12 months from the date of manufacture when stored
in initial packing.
Precaution Reminder:
1. Surface should be clean, dry, free of dust, oil or other
contaminants.
2. Proper pressure required by roller, hand or press when applying.
3. Avoid repeat sticking to prevent adhesion decrease.
Why buy from us instead of buying from other suppliers?
1. Good location and convenient transportation.
2. SGS certification.
3. Advanced production and processing equipment, environmentally
friendly and reliable products.
Notes:
Please be advised that this technical data sheet is written based
on our lab tests and experience only. Customer is responsible to
determine the suitability of the product meets intended application
requirements before approved for use.
