ESD Polyimide Heat Resistant Tape 290 °C 0.05 Thickness OEM ODM
High funcation high temperature resistant ESD polyemide tape
E1-IH803H polyimide heat resistant adhesive tape with good heating
resistance
E1-IH803H is a polyimide film-backed silicone adhesive tape with
super heat resistance and extremely low electrostatic discharge
properties. And insulation resistance of adhesive side is
measurable.
Features And Benefits:
1. Low electrostatic discharge at unwind and removal.
2. Resistant high temperature up to 290℃.
3. Excellent tensile strength & Elongation.
4. RoHS Compliant.
Application:
Masking for golden finger of Print circuit boards when wave
soldering or reflow soldering process, surface protection under the
high temperature without any residue.
Properties:
| Product | Units | Test values |
| Backing Thickness: | mm | 0.025 |
| Total Tape Thickness: | mm | 0.055±0.005 |
| Tack | | ≥26(J.DOW/#) |
| Adhesion to Steel: | N/25mm | 4N |
| Tensile Strength at Break: | KN/M | ≥3.5 |
| Elongation at Break: | % | ≥45% |
| Upmost Temperature | ° C | 290 |
| Surface Resistance | ohms | 106~9ohms |
| Static Discharge(Removal from roll) | Voltage | <100V |
Construction:
Storage:
1. Store under normal conditions of 10-30℃ and 40-70% R.H, out of
direct sunlight.
2. Shelf life: 12 months from the date of manufacture when stored
in initial packing.
Precaution Reminder:
1. Surface should be clean, dry, free of dust, oil or other
contaminants.
2. Proper pressure required by roller, hand or press when applying.
3. Avoid repeat sticking to prevent adhesion decrease.
Why buy from us instead of buying from other suppliers?
1. Good location and convenient transportation.
2. SGS certification.
3. Advanced production and processing equipment, environmentally
friendly and reliable products.
Notes:
Please be advised that this technical data sheet is written based
on our lab tests and experience only. Customer is responsible to
determine the suitability of the product meets intended application
requirements before approved for use.
