Anti Static Heat Resistant Adhesive Tape
Anti-Static And High-Temperature Masking Tape E1-MH318G With
Excellent High Temperature Resistance
E1-MH318G is an anti-static and high-temperature masking tape. The
product not only has good adhesiveness, but also has no residue on
the surface after removal, and provides high-temperature shielding
protection for important areas.
Features And Benefits:
E1-MH318G with excellent high temperature resistance and high
instantaneous bonding strength, easy to remove, no glue residue.
Properties:
| Item | Typical Value |
| Total Thickness | 0.145±0.010mm |
| colour | Off-white |
| Adhesion to Steel | ≥2N/25mm |
| Tensile Strength | ≥2KN/M |
| Elongation | ≥5% |
| Surface Resistance | 106-1011ohms |
| Operating Temperature | 260℃ |
Construction:
Application:
Mainly used in the circuit board wave soldering process to protect
the gold fingers on the circuit board and other sockets, surface
protection, etc.
Storage
1. Store under normal conditions of 10-30℃ and 40-70% R.H, out of
direct sunlight.
2. Shelf life: 12 months from the date of manufacture when stored
in initial packing.
Precaution Reminder:
1. Surface should be clean, dry, free of dust, oil or other
contaminants.
2. Proper pressure required by roller, hand or press when applying.
3. Avoid repeat sticking to prevent adhesion decrease.
Notes:
Please be advised that this technical data sheet is written based
on our lab tests and experience only. Customer is responsible to
determine the suitability of the product meets intended application
requirements before approved for use.
