Wedge Wire DSM Sieve Bend Curved Screens Panel For Dewatering
Applications
Category: Sieve Bend Screen
Material: stainless steel 304,304L,316,316L,321,430 or as per your
request.
Properties: sieve bend screen
Application: water-treatment,beer brewing,water well drilling ,oil
well drilling ,mineral processing, coal-cleaning plant, refining &
petrochemical
Details of Wedge Wire DSM Sieve Bend Curved Screens Panel For
Dewatering Applications
Wedge Wire DSM Sieve Bend Curved Screens Panel is also known as a
parabolic, arc screen etc. Wedge Wire DSM Sieve Bend Curved Screens
Panels are ideal for sizing and dewatering applications to remove
solids from liquids, or in solid/solid separation for dry feed
situations.
The Wedge Wire DSM Sieve Bend Curved Screens Panels are made of
V-shape wire or wedge shape wire around an internal array of
longitudinal support rods. Each jointpoint of these wire is fusion
welded, the V or wedge shaped profile wire wraps around the support
rods over the full length of the screen creating a continuous slot
opening. Therefore the screen allows wate
Usages of Wedge Wire DSM Sieve Bend Curved Screens Panel For
Dewatering Applications
1) Widely used in vairous kinds of medium filtering
2) As the fitting using in the water-treating equipment;the
environment protection; the sea water transforms into the
industrial water and life use water desalination treatment; running
water treatment; softening treatment;
3) The petroleum industry: the petroleum product terminal filters
and the chemical acid; the alkali liquid filters, the ethyl
alcohol;
4) The organic solution recycling filter
Features of Wedge Wire DSM Sieve Bend Curved Screens Panel For
Dewatering Applications
1. flatness to within tight tolerances
2. no weakening of the welds, because of flattening (and no stress
corrosion problems as a result)
3. accurate distance between support profiles
4. possibility of different support wires in one screen
5. possibility of variable spacing between support wires in one
screen
Customizable of Wedge Wire DSM Sieve Bend Curved Screens Panel For Dewatering
Application
According to your requirements, we can process and manufacture
various shapes of sieve plates.
Wedge Wire Sieve Bend Panelconsists of a concave curved profile
wire screen mounted in a frame with the screen openings
perpendicular to the flow. A curved screen has greater capacity
than a flat screen due to forces exerted as material flows against
the curved surface.
Slot: form 0.1mm, tolerances: ± 0.05mm.
Maximum size: 3000mm x 4000mm.
Material: Low Carbon, Low Carbon Galvanized steel (LCG), Stainless
Steel ( 304, 304L, 316, 316L, etc).
Various applications including:
Food processing
Pulp and paper processing
Rubbish removal from water
Water intakes
Coal preparation
Gold recovery
Wedge Wire Specification:
| PROFILE WIRE | | | | | | | | |
| WIDTH(mm) | 1.50 | 1.50 | 2.30 | 2.30 | 1.80 | 3.00 | 3.70 | 3.30 |
| HEIGHT(mm) | 2.20 | 2.50 | 2.70 | 3.60 | 4.30 | 4.70 | 5.60 | 6.30 |
| SUPPORT ROD | | | | | |
ROUND |
| WIDTH(mm) | 2.30 | 2.30 | 3.00 | 3.70 | 3.30 | Ø2.5--Ø5mm |
| HEIGHT(mm) | 2.70 | 3.60 | 4.70 | 5.60 | 6.30 | ---- |
---------------------------------------------------------------------------------------------------------------
Our factory Xinlu Wire Mesh product co., Ltd located in Anping
country, Hebei Province, China.
Our mainly products are: stainless steel vee sharped wire / wrap
wire, johnson type screeen, water well screen / rod based wire
wrapped screen, wedge wire screen, reverse wedge wire screen,
stainless steel strainer pipe, v wire slot tube, perfect roundness
well screen pipe, dewatering well screen, dewatering screen panel,
wedge wire grating, v wire flat panel, screen nozzle, water and gas
strainer nozzle, stainless steel filter nozzle, wedge wire support
grids, sieve bend plate, v wire screens, ARC screen, filter bottom
nozzle, stainless steel lateral screens, wedge wire filter candles,
Rotary drum screens, strainer cylinder, sand control well screen,
oil well screen, rod based continuous slot screens, header and hub
laterals & hub radial laterals etc.
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: 3-5 days for Sample preparing , 15-25 working days for mass
production.
Q3. Do you have any MOQ limit for the order?
A: Low MOQ, 3pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Airline, sea shipping and rail transportation are all optional.
Or ship by EMS, DHL, UPS, FedEx or TNT, it takes 5-7 days to
arrive.
Q5. How to proceed an order?
A: Firstly let us know your need specification or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly customer confirms and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production.
