Mining High Weir Spiral Classifier Machine 8t/H-40t/H Capacity For Beneficiation

Mining High Weir Spiral Classifier Machine for Beneficiation

Principle overview

The finely ground pulp is fed into the water tank from the feed inlet in the middle of the settlement area. The slurry gradation settlement area is under the inclined installation of the water tank. The spiral low speed rotation plays a role in stirring the pulp, making the fine particles suspended above and overflow to the overflow weir. Coarse particles sink to the bottom of the tank and are transported by a screw to the discharge port for returm sand discharge. The position of the overflow weir is higher than the bearing center at the lower end of the spiral shaft and lower than the upper edge of the spiral at the overflow end.

Features

1).Simple structure, reliable running and easy operation.

2).It mechanically classifies through the mechanism of different sedimentation speed of solid particle in liquid due to different size and different specific gravity.

3).It can classify the ground material powder from the grinder, spiral the coarse grain into material inlet of grinder through the spiral chip, and discharge the classified fine grain from overflow surface.

4).Its base is made from channel steel, and its body is welded from steel plate.

5).The lower support of spiral bearing is of engine-bearing structure of good wear resistance and durability.

6).The lifting device is of electric and manual mode.

Range of use

Suitable for coarse grain classification.

Company introduction

Tangshan Mine Machinery Factory is a specialized manufacturer that produces complete sets of equipment for metallurgy, mining, building materials, environmental protection, as well as the design and manufacture of complete sets of sand and gravel materials, and the design and manufacture of dry tailings discharge. The company was founded in 1971 and turned into a joint-stock enterprise in 1997.

The company occupies more than 50 acres, with total assets of 90 million yuan and more than 200 employees, including 96 engineering and technical personnel.

Various processing and testing equipment: 8 meters, 5 meters, 4 meters vertical lathes, 8 meters, 5 meters, 3.15 meters gear hobbing machine, 6 meters planer, precision boring machine, medium frequency quenching and other larger processing equipment and automatic welding, ultrasonic welding More than 300 sets of flaw detectors, W15-23 material testing machines, aging vibration devices, etc.

The main products are: various models and specifications of Jinma brand crushers, ball mills, classifiers, magnetic separators, dewatering screens, linear screens, screening machines, feeders, vertical roller mills, etc.

Among them, 17 products have obtained national patents. Among them, the crusher and ball mill have won many national honors.

The products are sold all over the country and exported to Russia, Mongolia, South Korea, Chile and other international markets.

We are a member of the China Heavy Machinery Association, a member of the Crushing and Grinding Association, a member of the Mining Machinery Association, and a member of the China Building Materials Machinery Association. We have participated in the formulation of a number of equipment manufacturing standards.

The company's principles are: First-class talents, First-class management, First-class machine, First-class quality, First-class honor.

Sincerely hope to reach friendly cooperation with you.

FAQ to save your precious time!

Q1: Hi, are you a mining machinery manufacturer?
Answer: Yes, we are a professional manufacturer of mining machine. Our company welcomes customers to visit our factory at any time.

Q2: How long is the warranty period of your equipment? Does your company provide spare parts?
Answer: The warranty period of our machine is one year. For those wearing parts, we guarantee to provide high-quality parts for a long time.

Q3: How long does it take to deliver?

Answer: Production usually starts after receiving the advance payment. Small machine is guaranteed to be delivered within one month. Large-scale machine is guaranteed to be delivered within 2-3 months.

Q4: Do you provide machine operation guidance?

Answer: Yes. We have professional engineers for installation, commissioning and operation guidance.

Tangshan Mine Machinery Factory is a specialized manufacturer that produces complete sets of equipment for metallurgy, mining, building materials, environmental protection, as well as the design and manufacture of complete sets of sand and gravel materials, and the design and manufacture of dry tailings discharge. The company was founded in 1971 and turned into a joint-stock enterprise in 1997.

The company occupies more than 50 acres, with total assets of 90 million yuan and more than 200 employees, including 96 engineering and technical personnel.

Various processing and testing equipment: 8 meters, 5 meters, 4 meters vertical lathes, 8 meters, 5 meters, 3.15 meters gear hobbing machine, 6 meters planer, precision boring machine, medium frequency quenching and other larger processing equipment and automatic welding, ultrasonic welding More than 300 sets of flaw detectors, W15-23 material testing machines, aging vibration devices, etc.

The main products are: various models and specifications of Jinma brand crushers, ball mills, classifiers, magnetic separators, dewatering screens, linear screens, screening machines, feeders, vertical roller mills, etc.

Among them, 17 products have obtained national patents. Among them, the crusher and ball mill have won many national honors.
 

The products are sold all over the country and exported to Russia, Mongolia, South Korea, Chile and other international markets.

We are a member of the China Heavy Machinery Association, a member of the Crushing and Grinding Association, a member of the Mining Machinery Association, and a member of the China Building Materials Machinery Association. We have participated in the formulation of a number of equipment manufacturing standards.

The company's principles are: First-class talents, First-class management, First-class machine, First-class quality, First-class honor.

Sincerely hope to reach friendly cooperation with you.

​►Our company was founded in 1971 and has a history of more than 40 years. Rich experience and strong strength are the primary guarantee for equipment quality and after-sales service.

►We are located in the triangle of Beijing, Tianjin and Tang, with superior geographical location and convenient transportation. It is 180 kilometers away from Tianjin Port (3 hours by car) and can guarantee timely delivery.

►Choose excellent raw materials. The steel materials are selected from well-known domestic manufacturers as suppliers to fully guarantee the chemical composition of the raw materials and the mechanical properties of the equipment.

►Strict product testing. Welding is submerged arc welding, and each weld is inspected by a flaw detector (ultrasonic

flaw detection). After passing the test, it will continue to the next process.

►After each equipment is completed, it will be installed and run in the factory to ensure stable operation of the equipment before it is loaded and shipped.
After heat treatment, the casting spare parts are machined in our factory for processing. After processing, the quality inspection department will conduct quality inspection and flaw detection.

Q1: Hi, are you a mining machinery manufacturer?

Answer: Yes, we are a professional manufacturer of mining machine. Our company welcomes customers to visit our factory at any time.

Q2: How long is the warranty period of your equipment? Does your company provide spare parts?

Answer: The warranty period of our machine is one year. For those wearing parts, we guarantee to provide high-quality parts for a long time.

Q3: How long does it take to deliver?

 Answer: Production usually starts after receiving the advance payment. Small machine is guaranteed to be delivered within one month. Large-scale machine is guaranteed to be delivered within 2-3 months.

Q4: Do you provide machine operation guidance?

Answer: Yes. We have professional engineers for installation, commissioning and operation guidance.