1000Liter Per Hour Stainess Steel Water Filtration Double Pass
Reverse Osmosis System
Reverse osmosis water filtration RO system includes two parts:
pretreatment system and reverse osmosis. The two-stage reverse
osmosis water filtration device is also called two-stage reverse
osmosis, which is followed by a second reverse osmosis treatment.
The raw water after rough filtration is pressurized into the
pretreatment system. After entering the precision filter, it is
pressurized by the liquid level high pressure pump and sent into
the liquid level reverse osmosis system again. The pressure output
from the secondary high pressure pump of the system is again output
to the secondary reverse osmosis system. The product water is
called secondary reverse osmosis.
Main configuration of two-stage reverse osmosis:
The pretreatment system is configured with: raw water pump,
multi-media filter, activated carbon filter, automatic water
softener, pipeline, valve
The DRO reverse osmosis system is equipped with: first-level
high-pressure pump, second-level high-pressure pump, reverse
osmosis membrane, reverse osmosis membrane shell, membrane frame,
control system water inlet, solenoid valve, flush solenoid valve,
pressure regulating valve, high pressure switch, low pressure
switch , Precision filters, pipelines, valves.
The storage system includes: liquid level controller, water tank.
Specifications:
| Model | LDM-II-B-1000 |
| Voltage/frequency | 380V,220V / 50Hz |
| Capacity | 1000LPH |
| Desalting rate | 99% |
| Water Recovery rate | 50-70% |
| Conductivity of pure water | ≤10μs |
Pictures
