This test is performed to characterize thermal durability of a cell
by exposing at a low and high temperature environment alternately
to cause expansion and contraction of cell components.
Technical Parameters
IEC 62660-2 Test Standard Temperature Test Chamber
Thermal Test
a) Adjust the SOC of the cell to 100% for BEV application, and to
80% for HEV application.
b) The cell, stabilized at room temperature, shall be placed in a
gravity or circulating air-convection oven. The oven temperature
shall be raised at a rate of 5K/min to a temperature of 130℃±2K. The cell shall remain at this temperature for 30 min before the
test is discontinued.
Temperature Cycling
a) Adjust the SOC of the cell to 100% for BEV application, and to
80% for HEV application.
b) Perform the temperature cycling in accordance with ISO 16750-4
as shown in Table 4 the minimum operating temperature shall be -40℃ or Tmin specified by the cell manufacturer and the maximum
operating temperature shall be 85℃ or Tmax specified by the cell manufacturer. Perform 30 test cycles
as specified.
Detail Design
Test Area
1.SUS304 stainless steel 2.Internal Dimension:50L and 80L 3.Rust-proof to high and low temperature and moisture corrosion;
4.Adjustable sample shelves, facilitate the various sizes of test
samples.
Cable Hole
1.Inner hole diameter is 50mm. 2.Convenient for the cable to pass through,and provide power for
the test piece 3.Reliably Sealing 4.Customizable test hole size
Controller
1.PID programmable color touch screen controller 2.Can be network
connection computer 3.Can edit 100 programs 100 segments 4.Multiple
languages are available
Advantage
1.Multiple model:T-100,T-225,T-500,T-800,T-1000 2.Testing small and large test pieces,Can be powered 2.Low types:
-20℃/-40℃/-60℃/-70℃/-86℃ 3.Free calibration 4. 72 hours commissioning before delivery to ensure product performance
