MEC855 1.6mm Ni95Al5 Thermal Spray Wire
Introduction:
DLX is the manufacturer of nickel alloy wire. And Ni-all thermal
spray welding wire NiAl 95/5 (TAFA 75B)are widely used in arc and
flange flame spray systems, Coatings to resist heat and prevent
scaling of conventional low alloy steels,Bond coats for improving
the adhesion of top coatings,Coatings on moulds in the glass
industry.
Typical Uses and Applications:
This material has proven very effective in providing long term
protection to boiler tubes against high temperature sulfidation.
The wrought material is highly resistant to sulfur/vanadium
atmospheres up to 1800°F. Wrought material of this type has shown a
2 mil per year corrosion rate over a nine year period when used in
the super heater section of boilers. Coatings of 45CT wire applied
to boiler tubes have shown virtually no loss of thickness or
spalling after 24 months of service (as of this writing).
| Item | Inconel 625 | Ni95Al5 | 45CT | Monel 400 | HC-276 | Cr20Ni80 | K500 |
| C | ≤0.05 | ≤0.02 | 0.01-0.1 | ≤0.04 | ≤0.02 | ≤0.08 | ≤0.25 |
| Mn | ≤0.4 | ≤0.2 | ≤0.2 | 2.5-3.5 | ≤1.0 | ≤0.06 | ≤1.5 |
| P | ≤0.01 | ≤0.01 | ≤0.01 | ≤0.01 | ≤0.01 | ≤0.02 | ≤0.01 |
| S | ≤0.01 | ≤0.01 | ≤0.01 | ≤0.01 | ≤0.01 | ≤0.01 | ≤0.01 |
| Si | ≤0.15 | ≤0.2 | ≤0.2 | ≤0.15 | ≤0.08 | 0.75-1.6 | ≤0.5 |
| Cr | 21.5-23 | ≤0.2 | 42-46 | - | 14.5-16 | 20-23 | - |
| Ni | Rest | Rest | Rest | 65-67 | Rest | Rest | Rest |
| Cu | - | - | - | Rest | - | - | 27-33 |
| Mo | 8.5-10 | - | - | - | 15-17 | - | - |
| Ti | ≤0.4 | 0.4-1 | 0.3-1.0 | 2.0-3.0 | - | - | 0.35-0.85 |
| Al | ≤0.4 | 4--5 | - | ≤0.5 | - | - | 2.3-3.15 |
| Fe | ≤1.0 | - | ≤0.5 | ≤1.0 | 4.0-7.0 | - | ≤1.0 |
| Nb | 3.5-4.15 | - | - | - | - | ≤1.0 | - |
| Co | - | - | - | - | - | - | - |
| V | - | - | - | - | ≤0.35 | - | - |
| W | - | - | - | - | 3.0-4.5 | - | - |
| Impurities | ≤0.50 | ≤0.50 | ≤0.50 | ≤0.50 | ≤0.50 | ≤0.50 | ≤0.50 |
(1) For vacuum coating
(2) For making valves grid, inner components of vacuum valves
(3) Components insides the electron tubes
(4) For making lead, supporting wire
(5) For Electronic components
(6) For battery production
(7) Strong base of the filter
Wire: 0.8mm 1.2mm 1.6mm 2.4mm 3.2mm.
Products are generally supplied in standard cardboard boxes,
pallets, wooden boxes. Special packaging requirements can also be
accommodated. (also depend on the customers' requirements)
For the Thermal spray wires , we wind small size wire less than
1.6mm wires on spools. Bigger size over than 2.4mm in coils. Then
put spools into cartons, Then put the cartons onto pallet or wood
box.
1) Free sample could be supplied for testing purpose.
2) Customized lable, packing, OEM service.
3) Mill test certificate will be provided after production.
4) Good packing methods to keep goods statable.
