Customization Lebus Groove Double Or Four Cable Winch Drums For
Mining
Product Information
| Product name | Customization Lebus Groove Double Or Four Cable Winch Drums For
Mining |
| Drum Quantity | Single Or Multi |
| Drum Design | LBS Groove Or Spiral Groove |
| Material | Carbon Stainless And Alloy Steels |
| Size | Customization |
| Application Range | Construction Mining Terminal operation |
| Power Source | Electric and hydraulic |
| Rope Capacity | 100~300M |
Multi Drum Winch
In order to meet the requirements of drilling technology and
transportation, the winch is usually designed as a multi-shaft
drive and separate transportation, which not only makes the system
complex, but also increases the cost and installation workload. To
this end, the transmission scheme of the winch, power input mode
and the structure of the winch frame have done pioneering work, my
company designed a multi drums winch. The winch is mainly composed
of base, winch frame, roller shaft, sand drum shaft, shaft drive
boxes, disc brake, crash-proof crown device, main brake mechanism
and automatic driller, etc, and power shift between the input shaft
and the shaft adopts mechanical transmission, drive shaft and
roller shifting between adopts pneumatic clutch to shift, with four
are blocked, reverse gear. Finite element software was used to
simulate and analyze the drum shaft and check its strength and
stiffness. The analysis and check results show that the design of
the drum and frame of the winch is reasonable and meets the
practical work requirements.
LEBUS DRUMS
In the winch, the wire rope plays an irreplaceable effect, so how
can we do to avoid the phenomenon of wire rope there is disorderly
rope? As a winch, it also makes some methods to avoid wire rope
chaos, its drum has more obvious groove, double drum winch, these
grooves can be better fixed wire rope.
Operation method
First, the wire rope is not sorted out before hoisting, and the
wire rope is checked by itself, and the wire rope with a higher
proportion of broken rope should be replaced in time. Second, do a
good job of fixing the winch, the base of the winch is unstable,
and the winch is prone to displacement when lifting. Show ropes.
Third, when lifting, adhere to the wire rope and drum into a 90
degree Angle. The above is to avoid the method of small winch wire
rope chaos. There are many parts on the winch. The effect of
different parts is different, and the fault response method will be
different
Overveiw Drum Winch Descption
Drum is one of the important parts of lifting machinery, used to wind wire rope in lifting mechanism or traction
mechanism.By transferring the driving force provided by the hydraulic or
electric drive device to the wire rope, the rotary motion of the
drive device is transformed into the linear motion required.
Drum Classification
1. According to the number of winding layers:
1) Single winding: Only 1 layer of wire rope is wound on the drum, spiral groove is
usually cut on the drum surface.
2) Double winding: The drum is wound with 2 layers of wire rope, spiral grooves or
lebus grooves can be used.
3) Multi-winding:Multilayer wire rope winding on the drum, used for particularly
large lifting height or compact mechanism occasions, the surface of
the drum cutting lebus grooves.
2. According to the processing method:
1) Casting Drum:The casting material is usually cast steel or cast iron.
2) Welding Drum:The drum core is made of seamless pipe or rolled with steel plate,
welding flange and drum core, and eliminating welding stress before machining.
3. According to the number of drum segmentation
1) Double winding:Two wire ropes can be wrapped around a drum.The rope can be wound in the same direction or in the opposite
direction
2) Multi-winding:The surface of a drum is divided into several drums by baffles,
each of which can be used separately for winding rope.
Four drum hoist, four hook hoist. Four wire ropes are fixed on a drum, respectively, from the drum,
from the bottom of the drum, when the drum rotates, one lifting
container up, the other container down.
Drawing Dimensions
Drum Features:
Processing Equipment: CNC Machining Center
Rotation Direction Of Grooves: Lefthand
Wire Rope Diameter: 3 MM~65 MM
Each Layer Laps: 20.5 laps
Layer: 5 Layer
Rope Groove Type: LEBUS Rope Groove
Number Of Ropes: Four
