Lebus Grooves 30mm Wire Rope Winch Drum For Lifting Machinery
Product Introduction
The LBS grooved winch drum is designed and produced specifically to
meet the application for which is used. According to the rope’s
diameter,length and construction type,we can confirm groove
pattern.
The Characteristics Of The Grooves
1. It has specifically groove to make wire rope spooling orderly
and uniform strength on every layer.
2. It can be calculated the exact forces that the rope imposed on
the drum.
3. The spooling is totally under control,which prevents lower
layers being crushed or pinched by upper layers
4. With the groove,the continuous groove in the drum is parallel to
the flange except for two crossover points on each Revelution where
the groove moves across the drum half a pitch to give a pull pitch
of movement for each pitch.
Design Parameters Of Wire Rope Winch Drum
1. Drum diameter
2. Width between flanges
3. Wire rope or cable diameter
4. Rotation direction of wire rope: left and right
7. Material of the drum
8. Diameter of flange
9. Maximum working load of wire rope
10. The maximum capacity of the wire rope/cable
11. The position angle of the drum and the fixed pulley
12. Rope entry mode
13. If possible, provide detailed drum drawings:
Note: The drum is divided into integral type and split type, the
Integral need drawing processing.
The split need inner diameter, outer diameter, length, the diameter
of the wire rope, the direction of the rope groove (left or right)
Outline Structure Of Drawing
Processing Technic
