Automatic computer cutting machine electronic wire sheath line
cutting and peeling machine
Specification parameters
Model 230 full automatic computer wire cutting and peeling machine
Appearance size 450mm x 450mm x 360mm
Weight 36kg (net)
Power supply voltage a110v -- 220V (50 / 60Hz)
Power consumption min.20w -- min.220w
Cutting length 0.1mm -- 60000mm
The peeling length is 0.1mm-99mm (depending on the wire). The
three-stage peeling can reach 999mm
Twist length
The cut-off error can be corrected
Applicable wire diameter AWG 16 -- AWG 32 (depending on wire)
Feature description
The most advanced electronic products tend to be light, thin, short
and small, so the required wires also tend to be thin. Short wires
and high precision can just give full play to the maximum length.
In the past, it was considered difficult to process the short wire
within 50 mm, but now there is no difficulty. Even when the total
length is only 1 mm, the two ends can be peeled 0.3 mm at the same
time. At the same time, the wire can be sent, the knife can be fed,
the knife can be withdrawn, and the peeling speed can be increased.
For the isolation wire, it can be peeled to 99 mm, which eliminates
the problem that the isolation wire can not be completely peeled
and the centerline can be injured.
