Description
Thermal shock tester can be used to test the structure of the
material or composite material, in an instant by a very high
temperature and low temperature continuous environment can bear
degree of to in the shortest time test its due to thermal expansion
and contraction caused by the changes of chemical or physical
damage.
Parameter
| Name | Air To Air Thermal Shock Chamber |
| Model | TS-340 |
| Inner dimensions of test room (mm) | 450*450*360 |
| Volume of test room (mm) | 72L |
| Load of test room | 30kg |
| Overall dimensions(mm) | 1710*1020*1845 |
Pre-heat room
| Upper limit preheat temperature | +220℃ |
| Heating time | Ambient temperature to ~ + 200℃, within in 30 minutes. |
Pre-cool room | Lower limit pre-cool temperature | -75℃ |
| Cooling time | Ambient temperature to ~ -70℃, within in 30 minutes |
| Test room | High temperature exposure range | Ambient temperature +20 to +200°C |
| Low temperature exposure range | –65 to -5°C |
| Recovery time | Within 15 minutes |
| Temperature fluctuation | ≤±0.5℃ |
| Temperature deviation | ≤±3 ℃ |
| Controller | Programmable color LCD touch screen controller |
| Cooling system | Mechanical compression refrigeration system |
| Refrigerating unit | French TECUMSEH compressor |
| Refrigerant | R404A, R23 |
| Air circulation | Centrifugal wind fan |
| Exterior material | Steel Plate with protective coating |
| Interior material | SUS304 stainless steel |
| Power Supply | 380V 50HZ |
| Environmental conditional | 5℃～+40 ℃ ≤85% R |
Structure
 | Thermal shock machine ,The upper part of the low temperature
chamber, the middle for the studio, the lower part of the high
temperature chamber. Sample does not move in the studio, the high
and low temperature impact the gas damper dynamic switching to
automatic switching, the cabinet is arranged on the upper right
corner of the control, easy to operate. |
Advantage
●Temperature Range: -70°C~220°C Or Tailor-made
●Test Space:22 To 505 Litres
●Electronic: AC220V·50HZ/380V·50HZ
●Meet Test Standard: IEC, ASTM, MIL, ISO Etc
●Interior Material:SUS 304
●Refrigeration:Unit Cooling Mode / Dual Cooling Method
(air-cooled)as Per Size Of Chamber And Specific Low Temperature
●Temp Conversion Time:≤10 Seconds
●Temp Recovery Time:≤5 Min
Main Features
1. Three sections: High temperature chamber, low temperature
chamber, testing chamber.
2. High formula memory capacity can store 120 patterns, 9999
cycles, setting time for each pattern
is 9999 Hrs 59 Mins.
3. RS-485 communication interface device, capable of connecting
with computer.
4. Choose 2 zone/3 zone shocks.
5. Touch screen controller
6.Support for custom(Color, size, Logo, material,)
