34kw With Single Axle Trailer Degassing Vacuum Turbine Oil Purifier
Vacuum Turbine Oil Purifier Working Principle:
1.Vacuum oil purifier is designed according to the boiling point of
water and oil. It is composed of vacuum heating tank, fine filter,
primary filter, vacuum pump, exhaust oil pump and electrical
cabinet.
2. Vacuum pump will air out creating vacuum in the vacuum tank, the
oil under the action of atmospheric pressure, oil after entrance
pipe into the prefilter to remove larger particles, and then enter
the heating tank, after heated to a temperature of 40-75 ℃ of oil
into the vacuum tank, oil in water evaporate into water vapor
rapidly and continuously in the vacuum pump oil water separator,
The water vapor in the separator is cooled and reduced to water
before being released.
3. The oil in the vacuum heating tank is discharged into the fine
filter by the exhaust pump through the filter element to filter out
the particulate impurities. In order to complete the vacuum filter
quickly remove impurities in the oil, water, gas, the whole
process, so that the clean oil discharged from the exit of the
machine.
Where do Contaminants Come from in Oil?
1. External environmental sources
2. Air vent systems that may let in particles and dirt.
3. Internal environmental sources
4. Oxidation that forms acids, resins, etc.
5. Rust and corrosion
6. Leaking coolers
Corollary Equipment-VR Vacuum Pump Set:
SINO-NSH-VR is units create vacuum in transformer and other
equipment with double-stage vacuum system.
| Parameter | Value |
| VR-30 | VR-70 | VR-150 | VR-300 | VR-600 | VR-900 |
| Capacity, liters/hour | 100 | 250 | 500 | 1000 | 2000 | 3000 |
| Total Power, kW | 3 | 3 | 5 | 7 | 8 | 13 |
| Power supply | Fully Customizable |
| Maximum Vacuum Range,Pa | 0.06 |
| Outlet Diameter, mm | 32 | 32 | 40 | 40 | 50 | 65 |
| Dimensions | length, mm | 900 | 550 | 1000 | 1200 | 1500 | 1950 |
| width, mm | 800 | 900 | 800 | 800 | 1000 | 1800 |
| height, mm | 1200 | 800 | 1200 | 1200 | 1200 | 1300 |
| Weight(without trailer), kg | 450 | 550 | 600 | 900 | 950 | 1950
|
Vacuum Turbine Oil Purifier Technical Parameters:
| Parameter | Value | | |
| TF-20 | TF-30 | TF-50 | TF-100 | TF-150 | TF-200 | TF-300 |
| Capacity, liters/hour | 1200 | 1800 | 3000 | 6000 | 9000 | 12000 | 18000 |
| Heating Power, kW | 15 | 24 | 30 | 48 | 72 | 96 | 120 |
| Total Power, kW | 18 | 17 | 34 | 53 | 78 | 103 | 129 |
| Power supply | Fully Customizable |
| Inlet Diameter, mm | 25 | 25 | 32 | 40 | 40 | 50 | 65 |
| Outlet Diameter, mm | 25 | 25 | 32 | 40 | 40 | 50 | 65 |
Dimensions
(without trailer) | length, mm | 1300 | 1300 | 1450 | 1650 | 1850 | 2000 | 2400 |
| width, mm | 1900 | 900 | 1000 | 1150 | 1250 | 1350 | 1700 |
| height, mm | 1460 | 1460 | 1510 | 1560 | 1610 | 1660 | 1760 |
| Weight(without trailer), kg | 300 | 330 | 450 | 650 | 750 | 900 | 1500 |
| Processed Oil Spec | Water Content, ppm | ≤100 |
| Dielectric Strength, Kv | ≥6 |
| Filtration Fineness, um | ≤5( or 1-5 as needed ) |
| Gas Content, % | ≤15 |
Other Models of TF Series Turbine Oil Purifier:
| NSH-TF-Z Coalescence and Separation Turbine Oil Purifier |
Sino-NSH-TF-Z is a dehydration and filtration unit, especially
suits for purification of turbine oil and fuel, etc.
Sino-NSH-TF-Z combines the latest innovations in coalescence
separation technology and micro-glass filter media in one system to
achieve optimal fluid cleanliness. With specially designed filter
elements, it can efficiently separate water from oil quickly, break
the emulsification, as well as remove particulate pollutants. After
separation, the water content can be reduced to less than 100 PPM,
and the cleanliness can reach or better than NAS4~6 Grade.
Sino-NSH-TF-Z can effectively save operating costs as no heating or
vacuum is required, and it is designed for continuous operation and
unattened operation. |
| NSH-TC Turbine Oil Vacuum Purifier and Centrifugal Combination
Plant |
Sino-NSH-TC is a comlete oil purification system integrating vacuum
oil purifier and centrifugal separator, widely used for the
filtration and purification of turbine oil, as well as other
lubricant oils.
Sino-NSH-TC adopts vacuum and centrifugal technology, designed to
meet the divers needs of customers. It can effectively remove free
water, dissolved water as well as emulsified water, reduce the
water content to less than 100 PM. Also remove the particulate
contamination from oil with high precision centrifugal separator.
Centrifugal separator is able to remove 99.95% of solid
contaminates and 99.4% of water.
Various capacities are avaliable for this system, and some optional
devices such as
PLC control system, Container structure, etc. |
Tailorded Vacuum Oil Solutions:
Sino-Nsh Plants could implement accessible and reliable solutions
for unique request and practical usage. It could be special
demension request, special structure adoption, unusual using
condition demand, or exact performance requirement. Sino-NSH
professional technical group and crafted skill man ensure every
Sino-NSH system is custom engineering and design that exceed your
expectation.
Order Process:
Choose type→Sign the contract→Customization→The
test→Delivery→Collect the goods
