Feature of metal baler
1. Driven by hydraulic pressure. It works smoothly and safely.
2. Manual or PLC automatic control mode is adopted.
3. The discharging forms are: rollover bale, roll bale, forward
bale or no bale.
4. Installation does not require sole screw, where there is no
power supply, diesel engine can be used as power.
5. Product specifications and types: Metal balers have 63-600 tons,
10 varieties and more than 20 specifications, which can meet the
different needs of customers at different levels.
Application industry of metal baler
Scrap metal baler machine can squeeze various metal raw materials
into qualified materials, and the recycling and processing industry
and necessary equipment of metal smelting industry
(1). Extrusion of waste metal materials
Scrap metal baler can extrude waste metal raw materials into
qualified materials, such as extrusion waste oil barrel, extrusion
metal scrap, extrusion steel scrap, extrusion steel shavings,
extrusion copper scrap, extrusion iron scrap, extrusion aluminum
scrap, extrusion automobile shell, extrusion aluminum shavings and
so on. After extrusion, the waste metal raw materials become
qualified charge.
(2). Convenient recycling of waste metal
The shape of the extruded scrap is cylinder or cuboid. It is
convenient for the storage, transportation or recycling of
materials.
(3). Widely used in food, medicine, hardware, chemical industry,
clothing, post and other industries, suitable for carton baling,
paper baling, letter baling, medicine baling, light industry
baling, hardware baling, ceramic baling, auto parts baling, daily
chemical baling.
working principle of metal baler
One is to run the scrap metal baler machine with no load, start the
motor oil pump, the spool of the directional valve is in the
middle, the output oil of the oil pump returns to the oil cylinder
through the electro-hydraulic directional valve under the pressure
regulated by the relief valve, and the system is unola. The second
is the hydraulic packing action. When the oil pump is working, the
output of the oil pump enters through the control valve under the
regulated pressure through the directional valve. The piston rod
behind the main cylinder chamber slowly drops, and the oil in front
of the cylinder is Rutu. The oil tank is connected to the oil tank
through the reversing valve, and the packing machine realizes the
packing function; finally, the metal hydraulic packer is reset, and
the oil pump works, and the output of the oil pump is transferred
to the front chamber of the main oil cylinder under the regulated
pressure, and the oil returns to the oil tank and the packing box
at the rear of the oil cylinder, and the oil tank returns.
