RS485 50/60Hz PV Hybrid Solar Inverter DSP Grid With Lithium Battery

Name: RS485 5060Hz PV Hybrid Solar Inverter DSP Grid With Lithium Battery
Brand: CONSNANT
Price: 1 USD

Ask Lasest Price
Brand Name :	CONSNANT
Model Number :	HT4830S80-145 \| HT4840S80-145 \| HT4850S80-145 \| HT4825U80-145 \| HT4830U80-145 \| HT4835U80-145
Certification :	CE(EN62109); EN61000; C2
Price :	Negotiable
Payment Terms :	L/C, T/T, Western Union
Supply Ability :	1000 pieces per month
Delivery Time :	5-8 days for sample order, 15-21 days for large quantity

Add to Cart

Product Details
Company Profile

RS485 50/60Hz PV Hybrid Solar Inverter DSP Grid With Lithium Battery

Mutiple Mode Hybrid PV Energy Storage Grid Solar Inverter

Product Instruction:

HT series is a new hybrid PV energy storage inverter controller integrating PV energy storage,mains charging

and storage and AC sine wave output. Using DSP control through advanced control algorithms, it comes with high

response speed, high reliability, high industrialization standard and other characteristics.

Four charging modes are available: only PV, mains priority, PV priority, and hybrid charging by mains & PV;

two output modes: inverter and mains are available to meet different application needs.

Specification Reference:

Model	HT4830S80-145	HT4840S80-145	HT4850S80-145	HT4825U80-145	HT4830U80-145	HT4835U80-145
Mains mode
Rated input voltage	220/230Vac			110/120Vac
Input voltage range	(170Vac~280Vac) ±2% (90Vac-280Vac)±2%			(90Vac~140Vac) ±2%
Frequency range	47±0.3Hz ~ 55±0.3Hz (50Hz); 57±0.3Hz ~ 65±0.3Hz (60Hz);
Conversion time	10ms (typical)
(bypass and inverter)
Maximum bypass overload current	40A
Inverter mode
Output voltage waveform	Pure sine wave
Rated output power (VA)	3000(2600/2700 /3000)	4000(3480/360 3800/4000)	5000(4350/4500 /4800/5000)	2500(2000/2180 /2290)	3000(2500/2600 /2750)	3500(2900/3000 /3200)
Rated output power (W)	3000(2600/2700 /3000)	4000(3480/360 3800/4000)	5000(4350/4500 /4800/5000)	2500(2000/2180 /2290)	3000(2500/2600 /2750)	3500(2900/3000 /3200)
Rated output voltage (Vac)	230Vac(200/208/220/240Vac Settable)			120Vac(100/105/110Vac Settable)
Output voltage error	±5%
Output frequency range (Hz)	50Hz ± 0.3Hz 60Hz ± 0.3Hz
Efficiency	>92%			>91%
Overload protection	(102%<load<125%) ±10%: Report error and turn off output after 5 minutes; (125%<load<150%) ±10%: Report error and turn off output after 10 seconds; Load>150% ±10%: Report error and turn off output after 5 seconds;			(102%<load<110%) ±10%: Report error and turn off output after 5 minutes; (110%<load<125%) ±10%: Report error and turn off output after 10 seconds; Load>125% ±10%: Report error and turn off output after 5 seconds;
Peak power	6000VA	8000VA	10000VA	4000VA	4500VA	5000VA
Loaded motor capacity	2HP	3HP	4HP	1HP	2HP	2HP
Bypass circuit breaker specification	63A
Rated battery input voltage	48V (minimum starting voltage 44V)
Battery voltage range	40.0Vdc~60Vdc ± 0.6Vdc (undervoltage alarm / shutdown voltage / overvoltage alarm / overvoltage recovery...LCD screen can be set)
Eco mode	Load ≤ 50W
AC charging
Maximum charge current	0-60A			0-40A
Charge current error	± 5Adc
Charge voltage range	40 - 58Vdc			40 - 60Vdc
Circuit breaker specification	(AC IN) 63A/(BAT) 125A
PC charge
Maximum PV open circuit voltage	145Vdc
PV operating voltage range	60-145Vdc
MPPT voltage range	60-115Vdc
Battery voltage range	40-60Vdc
Maximum output power	4200W
PV charge current range (settable)	0-80A
Charge short circuit protection	BAT circuit breaker and fuse
Wiring protection	Reverse polarity protection
Hybrid charging Max charger current specifications (AC charger+PV charger)
Max charger current(can be set)	0-140A			0-120A
Certified specification
Specification certification	CE(EN62109)
EMC certification level	EN61000, C2
Operating temperature range	-15°C to 55°C
Storage temperature range	-25°C ~ 60°C
RH range	5% to 95% (conformal coating protection)
Noise	≤60dB
Heat dissipation	Forced air cooling, adjustable air speed

Product Maintenance:

No.	Protections	Remarks
1	PV current/power limiting protection	When charging current or power of the PV array configured exceeds the PV rated, it will charge at the rated.
2	PV night reverse-current protection	At night, the battery is prevented from discharging through the PV module because the battery voltage is greater than the voltage of PV module.
3	Mains input over voltage protection	When the mains voltage exceeds 280V (230V model) or 140V (120V model), the mains charging will be stopped and switched to the inverter mode.
4	Mains input under voltage protection	When the mains voltage is lower than 170V (230V model /UPS mode) or 90V (120V model or APL mode), the mains charging will be stopped and switched to the inverter mode.
5	Battery over voltage protection	When the battery voltage reaches the overvoltage disconnection point, the PV and the mains will be automatically stopped to charge the battery to prevent the battery from being overcharged and damaged.
6	Battery low voltage protection	When the battery voltage reaches the low voltage disconnection point, the battery discharging will be automatically stopped to prevent the battery from being over-discharged and damaged.
7	Load output short circuit protection	When a short-circuit fault occurs at the load output terminal, the AC output is immediately turned off and turned on again after 1 second.
8	Heat sink over temperature protection	When the internal temperature is too high, the all-in-one machine will stop charging and discharging; when the temperature returns to normal, charging and discharging will resume.
9	Overload protection	Output again 3 minutes after an overload protection, and turn the output off after 5 consecutive times of overload protection until the machine is re-powered. For the specific overload level and duration, refer to the technical parameters table in the manual.
10	PV reverse polarity protection	When the PV polarity is reversed, the machine will not be damaged.
11	AC reverse protection	Prevent battery inverter AC current from being reversely input to Bypass.
12	Bypass over current protection	Built-in AC input overcurrent protection circuit breaker.
13	Battery input over current protection	When the discharge output current of the battery is greater than the maximum value and lasts for 1 minute, the AC input would switched to load.
14	Battery input protection	When the battery is reversely connected or the inverter is short-circuited, the battery input fuse in the inverter will blow out to prevent the battery from being damaged or causing a fire.
15	Charge short protection	When the external battery port is short-circuited in the PV or AC charging state, the inverter will protect and stop the output current.

Fault Handling:

No.	Faults	Handling measures
1	No display on the screen	Check if the battery air switch or the PV air switch has been closed; if the switch is in the "ON" state; press any button on the screen to exit the screen sleep mode.
2	Battery overvoltage protection	Measure if the battery voltage exceeds rated, and turn off the PV array air switch and Mains air switch.
3	Battery undervoltage protection	Charge the battery until it returns to the low voltage disconnection recovery voltage.
4	Fan failure	Check if the fan is not turning or blocked by foreign object.
5	Heat sink over temperature protection	When the temperature of the device is cooled below the recovery temperature, normal charge and discharge control is resumed.
6	Bypass overload protection, inverter overload protection	① Reduce the use of power equipment; ② Restart the unit to resume load output.
7	Inverter short circuit protection	① Check the load connection carefully and clear the short-circuit fault points; ② Re-power up to resume load output.
8	PV overvoltage	Use a multimeter to check if the PV input voltage exceeds the maximum allowable input voltage rated.
9	Battery missed alarm	Check if the battery is not connected or if the battery circuit breaker is not closed.

Product Tags:

View Contact Details

Product List

Haven't found right suppliers
Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
And this service is free of charge.
we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!

Submit Buying Request

Send your message to this supplier

*From:
Your email address is incorrect!
To: Shenzhen Consnant Technology Co., Ltd.
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

All Categories

RS485 50/60Hz PV Hybrid Solar Inverter DSP Grid With Lithium Battery

RS485 50/60Hz PV Hybrid Solar Inverter DSP Grid With Lithium Battery

RS485 50/60Hz PV Hybrid Solar Inverter DSP Grid With Lithium Battery

60Hz PV Hybrid Solar Inverter

RS485 Hybrid Solar Inverter

DSP Grid Solar Power Inverter

RS485 50/60Hz PV Hybrid Solar Inverter DSP Grid With Lithium Battery

You May Like

CNS110 5500-48 Off Grid Inverter 5500W Pure Sine Wave Paralleled MPPT Solar Charger

CNS110 3500-24 3500W 24VDC Off Grid Solar Inverter Sine Wave For Household Appliances

Hybrid PV Energy Storage Solar Charger Inverter 220/230Vac 110/120Vac For Power Tools

5500W Off Grid Inverter Wide PV Input Voltage Range 100A MPPT Built In Dust Screen

SC HF Off Grid Inverter 3.5KW 5.5KW 24VDC 48VDC MPPT Sine Wave Output


*From:	Your email address is incorrect!
*To:	Shenzhen Consnant Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!