6-16mm Various Rope Diamter Elevator Rope Tension Meter Tension
Adjustment Kits HRD-DGZY
1.Summary
Usage and Application:
Elevator rope tension tester is mainly used in elevator wire rope
tension test . To check and adjust each wire rope of elevator in
the process of installation, check before acceptance and annual
inspection to ensure its tension as consistent as possible, thereby
prolonging the service life of the traction wheel . The tension
tester can also be applied to the bridge with sling, tower
wiring,overhead wire ,index wire rope and other tension test.
1.2 Product features
1.2.1 Portable:the tension tester use high-strength aluminum alloy
structure with light weight and small size.It is easy to carry ,one
person can complete all the operations.
1.2.2 The instrument has stable performance and high accuracy,when
the tested wire rope are consistent with wire rope tension tester
data ,the measuring precision can be 5%.
1.2.3 Light weight ,simple structure,easy to operate,suitable for
any occasion.
1.2.4 The instrument has 3 preset wire rope diameter model,just
need to choose the correct wire rope number when measuring .
1.2.5 LCD display shows the value force,it is more convenient to
reading.
1.2.6 Three units:N,Kg and Lb can switch into each other .
1.2.7 The instrument can store 383 measuring data,the data can be
output by computer.
2. Product Size and Model
2.1Product dimensions
2.2Product Model
| Model | HRD-DGZY-3000 | HRD-DGZY-5000 |
| Number | 1 | 2 | 3 | 1 | 2 | 3 |
| Diameter | φ6 | φ8 | φ10 | φ11 | φ13 | φ16 |
| Range | 3000N | 5000N |
| Min. Load Division Value | 1N |
| Scientific measuring range | 10%~90% |
| Accuracy | ≦±5% |
| Power | 7.2V 1.2V×6 NI-H Battery |
| Charger | Input: AC 100~240V Output:DC 12V 500mA |
| Weight (Kg) | 1.4 kg |
2.3 LCD Display
"
2.3.1 ON/OFF: Press ON/FF key to turn on or turn off .
2.3.2 MODE:turn on and then press “MODE” key to enter into setting menu, the
user can enter into setting menu by “MODE” key ,also can save data
when setting data by “MODE” key ; If you are in measurement
interface ,press “MODE” key for 5~6 seconds to turn over the the
force value on display.
2.3.3 MEMO:When you are in measurement mode,press “MEMO” key to save data.
Press “MEMO” key for 5 seconds to check the saved data.When you are
in “MODE” menu ,the “MEMO” is as a move function.
2.3.4 ZERO: In measuring mode , press “ZERO” key to clear data .In”MODE” menu
,the “ZERO’ key can be as return function.
3.The maintenance and warranty
3.1 Safety Cautions
3.1.1Please use the matching charger for charging, otherwise, it
will cause circuit failure, or even a fire.
3.1.2Do not use the power supply beyond the rated voltage of the
charger, or it may cause electric shock or fire.
3.1.3Do not plug or unplug with wet hands, or it may cause an
electric shock.
3.1.4Do not pull or drag the power wire to unplug the charger plug,
in order to avoid the electric shock caused by breaking the wire.
3.1.5Please use soft cloth to clean the instrument. Immerse the
cloth into the water containing detergent, wring it dry and then
clean up the dust and dirt.
Note: Do not use volatile chemicals to clean the instrument (such
as volatile agent, thinner, alcohol, etc.)
3.2 The maintenance of the using time
3.2.1 Do not use this instrument beyond the maximum measurement
range. Otherwise, it may lead to sensor damage, or even accidents.
3.2.2 When the test value exceeds the measurement range, the buzzer
will ring continuously, and at this moment please remove the load
quickly or reduce the load.
3.3 Maintenance during long term out of use
3.3.1Pleaseoperate and stock the instrument under the
prescribedtemperature and humidity, or it may result in equipment
failure.
4.Packing list
| 1 | Elevator Tension meter HRD-DGZY | 1 MODE |
| 2 | Charger | 1 piece |
| 3 | USB cable | 1 piece |
| 4 | Certificate and warranty card | 1 piece |
| 5 | Manual | 1 piece |
| 6 | Certificate of inspection | 1 piece |
| 7 | Desiccant | 1 piece |
