HUATEC HDL-450 NDT Constant Temperature Film Washer
I. working principle:
According to the principle of automatic film washer, the developer
and fixer are stirred (circulated) to the set temperature. Will be
installed X-ray film wash piece into the washing machine is
developed grooves, the washing machine automatic timing, to set a
time (time setting range: 1-6 minutes) after the buzzer warning
sound, working people can wash piece frame from developing slot
(stop warning buzzer sounds) into the into the stop show slot
(water tank) directly into 1-5 seconds into the fixing bath
immediately, 1-1.5 times the fixing time is developing, the last
film to be included in the water tank, water tank is developing
with the time 1-1.5 times. Take out the X-ray film and place it
directly in the film dryer to dry or air. At this point, the
development process is complete and you have the perfect industrial
film.
Ii. Functional features
1. Automatic timing of development: when a film washing frame is
put into the development tank, the machine will automatically start
timing. After reaching the set time, the user will be reminded that
the development time has reached (buzzer sound).
2. Deli dl-450 is equipped with a film viewing light and a dark
room red light, which provides convenience for film detection after
film washing and greatly improves the working efficiency
3. The development tank of deli dl-450 adopts electronic
refrigeration system, which can greatly reduce the noise of the
film washer and improve the film washer environment.
Iii. Technical parameters
Film specifications: 80×300mm, 80×360mm, 354×430mm
Development time 1-6 minutes (setting range)
Tank volume developing 7.5 gallons, fixing 7.5 gallons, washing 13
gallons
Film amount: 80×360mm film can develop 260 sheets per hour
(development time: 2 minutes)
Development temperature can be adjusted from 20 to 40 degrees
The fixing temperature is automatically adjusted according to the
developing temperature
The water temperature is 5 ~ 30 degrees
Water consumption 2 l/min for film development (automatic water
loading)
Power source 220~240V10A 50 or 60Hz
Weight 55kg (no liquid in tank) 65kg (filled with water)
Volume 72×57×89 cm (length × width × height)
| Conatact Person: |  
Esther Yu Scan here for my name card |
|---|
| Mobile Phone: | 0086-13910983110 |
|---|
| Whatsapp: | +86 18846112524 |
|---|
| Skype: | cindydon |
|---|
| Address : | 7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng
Haidian Dist.BeiJing,CHINA 100096 |
|---|
| Worktime : | 9:00-18:00(Beijing time) |
|---|
| Business Phone: | 86-10-82921131(Working time) 86-13910983110(Nonworking time) |
|---|
| Fax : | 86-10-82916893 |
|---|
