Xenon Accelerated Aging Test Chamber for Electronic Laboratory
Machine Summary:
Xenon Accelerated Aging Test Chamber is a kind of comprehensive
climate test equipment, support climate
aging test,polymer light fastness test(Polymer materials exposed to
simulated solar spectrum of artificial
lightthrough the glass to assess the light resistance of
materials). From the light, temperature, rain
orcondensation, humidity and so on to do the simulation and strengthen test; use simulating
full sunlight
spectrum xenon arc lamp to simulate the destructive waves of
different environment. Can be used for
theselection of new materials, improvement of existing materials or
evaluate the material durability
Aftermaterial composition changes and other testing.
The Xenon lamp Simulate the uv light, and the machine make the test
specimen expensed to uv light,high temperature and water spray to
proceed the test! This machine use xenon lamp tube to simulate
thesunlight
radiation, use the condensate and spray to simulate the dew and
rain.
This machine only need a few days or weeks time, can show the
condition or the parts components of aging damage status outdoor
many months even a few years time, including colour fading, color
change, fracture,
fissure, wrinkle, blister, embrittlement, strength reduction,
oxidation and so on.
Technical Parameters:
| Model | BT- Z-2025 Xenon Accelerated Aging Test Chamber |
| Sample exposure area | 560cm2 |
| performance index | blackboard or black mark temperature | BST 35°C-100°C |
| spectral wavelength | UV-A340, wave length:340nm |
| Irradiation light source | Full spectrum xenon lamp(air-cooled) irradiance/(w/m2*nm):adjustable |
| Xenon lamp power | 2.5kw (lifetime:2000 hours) |
Temp. and humi. control system | time controller | Import programmable time computer integrated controller(MOELLER) |
| Accuracy range | Setpoint accuracy: temperature±0.1°C Indication accuracy: temperature±0.1°C |
| Temp. Humi. Sensor | Platinum resistance Pt100Ω/mv |
| Heating system | The independent system,Nickel-chromium alloy electric heating heater |
| temperature controller | Import integrated microcomputer temperature and humidity controller |
| Circulatory system | Low noise of heat-resistant air-condition type motor, leafy typecentrifugal rotor, Cooling tubes used air-cooled system |
| Power voltage | AC220V±10% 50±0.5HZ |
| Dimension | 81x35x75CM L*D*H |
Maintenance of equipment:
Installation site should consider factors such as the cooling
efficiency of the machine and easy to check the maintenance, Other
installation considerations:
1.The distance between this machine with wall and any other
machines should be more than 60cm.
2.Should be set on the ground of the plain, no vibration, and use
gradienter examination.
3.Ambient temperature should be keep into 10°C~25°C, the machine
can operate in the most stable status.
If ambient temperature change too fast, for example change 5°C or
more in a few minutes, the temperature
and humidity control and cooling rate, will can’t very stable
control.
4.Should be away from the heat source and inflammable, explosive
substance.
5.Do not under direct sunlight, and maintain indoor airiness.
6.Avoid placed in the place of the dust too much.
7.Power supply line and the drain road, should be shortened as much
as possible.
Detailed Images
COMPANY PROFILE
BOTO GROUP is a professional manufacturer of various kinds of
testing equipment over 20 years. BOTO products are widely used in
paper products, packaging, ink printing, adhesive tapes, bags,
footwear, leather products, environment, toys, baby products,
hardware, electronic products, plastic products, rubber products
and other industries, and applicable to all scientific research
units, quality inspection institutions and academic fields.
BOTO deals with customers from more than 150 countries and regions.
Meanwhile, we are committed to cooperate with different dealers in
different countries and regions in order to offer better service.
Our mission is to help every customers establish testing labs to
ensure the quality of their products.
Our company will continue to develop, innovate and keep faith. We
combine with the international testing standards and the specific
demands of customers that may establish a new banner in Chinese
testing industry.
Customers
Pakcing and shipping
Our Services
During the whole business process, we offer Consultative Selling
service.
1) Customer inquiry process:
Discussing testing requirements and technical details, suggested
suitable products to customer to confirm. Then quote most suitable
price according to customer requirements.
2) Specifications customize process:
Drawing related drawings to confirm with customer for customized
requirements. Offer reference photos to show the products
appearance. Then, confirm the final solution and confirm final
price with customer.
3) Production and delivery process:
We will produce the machines according to confirmed PO
requirements. Offering photos to show production process.
After finish production, offer photos to customer to confirm again
with the machine. Then do own factory calibration or third party
calibration(as customer requirements). Check and test all the
details and then arrange packing.
Deliver the products in confirmed shipping time and inform
customer.
4) Installation and after sale service:
Defines installing those products in the field and providing
after-sales support.
