UV LED Module 560W uv led chip 395nm foruvink curing uv ink curing
lamp
UV LED Module Product Description
The product can be applied with either Water-cooling or
wind-cooling method.
Various other treating dimension as well as current could be
created according
your requirment, inluding mix
High efficiency and low consumption.Apply in various printing
industries, painting, and glue.
FAQ
Q1. Are you a factory?
A. Yes! We are factory in Shenzhen. We have been producing UV LED
products for seven years.
Q2. Can we customize the product?
A. Yes! We can produce according to your requirements or technical
drawings.
Q3. What is your main products?
A. UV LED Lamp Bead; UV LED Module; UV LED Single Light; uv curing
lamp.
Q4. What is your usual payment terms for orders?
A. T/T. Others payment terms also is ok.
Item | High Power UV LED Module |
Power | 560w |
Color | UV |
Diode Brand | DC, LG |
Diode type | 6565,6868 smd type |
Lens Material of Diode | Silica gel or quartz |
View Angle of the Lens | 60,90,120 degree |
Module size | 60mm*79mm*2.0mm |
| Luminous Size | 59mm*53mm |
Wavelength | 365nm,385nm,395nm,405nm |
Voltage | 45-53V*2 |
Current | 4-6A*2 |
Chip Material | LG,Seoul,Epileds |
Encapsulation process | 2.0mm High temperature quartz lens package |
Lifespan (hours) | 20000-30000 |
Warranty | 2 years |
| Application | Apply in various printing industries, painting, and glue. |
Place of Origin | Guangdong, China |
Matters needing attention
Attention should be paid to welding high-power UV LED:
1) The welding time should not exceed 3S;
2) Welding temperature should be less than 260 degrees Celsius.
3) When welding, distinguish positive and negative polarity, and
avoid lens to avoid damage to lens.
4) During the whole process of use, all people who are in direct
contact with UVLED should take
measures to prevent and eliminate static electricity, and do not
touch the UV light emitting diode
directly with their hands.
5) When welding, attention should be paid to the welding time and
temperature, and the positive
and negative polarities should be distinguished.
6) Electrical parameters such as current and voltage should not
exceed the rated values.
Thank you for your attention
