Hydraulic busbar bending machine for copper or aluminum bar
processing with one time bending and two angles bent
We are the MANUFACTURER of high quality busbar machines with competitive price. The products are widely used in the following industries,such as voltage switchgear,electric
transformer station,voltage transformer,etc.
Overview of busbar bending machine
The main function is processing copper and aluminum busbar with
different specifications. Only need to select the corresponding
processing unit, it can do different kinds of processing for copper
and aluminum busbar quickly and easily, such as shearing,
punching(circular hole and oblong hole), flat/horizontal bending,
vertical bending U-bending, embossing, flat pressing, twisting,
cable connector processing etc. Main features.
Principle characteristics
1. Using compressed air as the power source, it is highly efficient
and easy to operate, with simple structure and minimal maintenance.
2. Equipped with anti-rotation guide rods and guide plates, with
high precision, which can adapt to high-speed precision blanking.
3. Two-hand control or foot pedals can be selected. Ensure the
personal safety of operators.
4. The operation is simple, the safety type is high, the footswitch
is used to control the solenoid valve, the structure is simple, the
failure rate is low, and the production efficiency is improved.
5. There is no noise generated by the hydraulic system during
standby, which can save power consumption and reduce production
costs.
6. The height, speed, stroke, pressure, and stamping time can be
adjusted arbitrarily according to different products or molds.
Function introduction
A digital bus bar punching machine is used to punch the two ends of
the busbar at one time to guarantee parallelism between the busbar
profile and conductor. This parallelism ensures the reliable
connection between conductor and joint which can control joint
temperature rising. Key point is that the machine can adjust the
rebound coefficient according to the conductor’s material and
width. Rebound coefficient varies by bending or different conductor
width and this kind of adjustment can guarantee the parallelism.
Equipment data on digital copper bar punching machine
| No. | Parameters |
| Model | KD-YYJ-40(50)T |
| Bending Power Type | Hydraulic and pneumatic hybrid |
| Pressure | 40T or 50T, Max. 80T |
| Die | Fast die change |
| Workplace Size | L450mm*W340mm |
| Control Mode | Digital control |
| Air Source | 0.6MPa |
| Power | 220~230VAC 50~60Hz 80W |
| Equipment Dimension | L680mm* W580mm* H2600mm |
