T1 T2 Pure Copper Tube Air Conditioning Refrigeration

T1 Corrosion-Resistant Pure Copper Tube T2 Air Conditioning Refrigeration

Red Copper Tube Red Copper Coil Manufacturer

Introduction:

Light weight, good thermal conductivity and high low temperature strength.

It is often used to manufacture heat exchange equipment (such as condenser, etc.).

It is also used to assemble low-temperature pipeline in oxygen production equipment.

Copper pipes with small diameter are often used to transport pressurized liquids

(such as lubrication system, oil pressure system, etc.)

and pressure measuring pipes used as instruments.

The copper pipe has the characteristics of firmness and corrosion resistance,

which has become the focus of modern contractors in the installation of tap water pipes,

heating and refrigeration pipes in all residential commercial houses.

1. Copper is economical. Because the copper pipe is easy to process and connect,

the material and total cost can be saved during installation, and the stability is reliable

2. Copper is light. For twisted pipe with the same inner diameter,

the thickness of ferrous metal is not required for copper pipe. When installed,

the transportation cost of copper pipe is smaller, the maintenance is easier and the occupied space is smaller.

3. Copper can change shape. Because copper pipe can bend and deform,

it can often be made into elbows and joints. Smooth bending allows copper pipe to bend at any angle.

4. Copper is easy to connect.

5. Copper is e. No leakage, no combustion support, no toxic gas and corrosion resistance.

Copper pipe is hard, not easy to corrode, and resistant to high temperature and high pressure.

It can be used in a variety of environments. Compared with this, the disadvantages of many other pipes are obvious.

For example, the galvanized steel pipe commonly used in residential buildings in the past is very easy to rust,

and the problems such as yellowing of tap water and smaller water flow will occur after a short service time.

The strength of other materials will decrease rapidly at high temperature,

which will cause une hazards when used in hot water pipes.

The melting point of copper is as high as 1083 ℃, and the temperature of hot water system is insignificant to copper pipes.

Archaeologists found a copper water pipe 4500 years ago in the Egyptian pyramids, which can still be used today.

Who We are ?

-------A professional steel pipes materials inventor, manufacturer and solution provider
Torich International Limited is a professional manufacturer and exporter of steel pipes materials. It is an international marketing and sales company specialized in steel tubes, which holds the factories of Seamless Steel Tubes with Carbon and Alloy Steel Grade, Welded Precision Steel Tubes,DOM Steel Tubes, Seamless & Welded Stainless Steel Tubes with Nickel and Alloy Steel Grade.
Our factory was established since 1997, with the name of TORICH INTERNATIONAL LIMITED. The factories’ technicians are of great engineering experience in steel pipe industry for more than 20 years, which are in great command of production technology for Cold Drawing and Cold Rolling. So we have strong technician team and manufacturing capability.

What products we do?

------- Invent and produce various Precision Steel Pipes

Our steel pipes cover the following ranges:
Seamless Precision Steel Pipes

Bearing Steel Tubes
Welded Precision Steel Pipes, with DOM production
Seamless Heat Exchanger Steel Pipe
Seamless Boiler Steel Pipes

Honed Tubes

Hydraulic Cylinder Steel Tubes

Hydraulic Telescopic Cylinder Tubes
Seamless Structural Steel Pipes
Seamless Mechanical Steel Pipes
Seamless Alloy Steel Tubes & Pipes
Seamless Stainless Steel tubes
Welded Stainless Steel Tubes
Seamless Stainless Steel Tubes & Pipes
Welded Stainless Steel Tubes & Pipes
Seamless Carbon Steel Tubes & Pipes
Nickel Alloy Steel Tubes & Pipes

What TORICH do:
1. Producing Steel Tubes
2. Selling both on Domestic and International Market
3. Precisely Targeting Customers’ Requirement- Sourcing the right factory for right products for Customers

Products Application:
Oil Cylinders
Air Cylinder, 
Automotive Cylinder Liners
Boilers, Pressure Vessels
Shell & Heat Exchangers
Jack Lifting
Telescopic Systems
Pneumatic Cylinders
Agricultural Machineries

Size range is: 
O.D. 4-350mm, 
W.T. 0.5-30mm, 
Length: according to customer’s requirement and agreement
 

Steel Grade:
Carbon Steel Grade:
ST35.8, ST37.0, ST44, ST52;
E155, E195, E215, E235, E275, E355;
195GH, P235GH, P265GH, P195TR1, P195TR2, P235TR1, P235TR2, P265TR1, P265TR2;
SAE1010, SAE1020, SAE1026, SAE1035, SAE1045;

Carbon steel tube: SA178, A179, A192, A210, SA213, SA214, etc.
Alloy Steel Grade:
T2, T5, T9, T11, T12, T17, T21, T22, T91,T92, 15Mo3,16Mo3, 13CrMo44;
SAE4130, SAE4140, 40Cr, 40Cr4, 10CrMo910, 12CrMo910, 11CrMo910,
25CrMo4, 35CrMo, 35CrMo4, 42CrMo4, 34CrMo4, 20MnV, 20MnV6,20CrMn;
Carbon steel tube: A179,A192,A210,DIN17175,etc.

Bearing Steel Grades:
GCr15 52100 suj2 suj3 100Cr6 SKF3S SKF3S 20CrNiMo 8620H 4118H;

Nickel Alloy Grade:
N02200/2201, N04400, N06600, N06601, N06625, N06852, N06219, N06690, N08800/8810/8811, N08825, N08028, N08535, N08904, N08925, N08926, N010276, N06022, etc.

Austenitic/Super Austenitic Stainless Steel Grade:
304/304L, 316/316L, 314, 321, 347H, 316Ti, 316LMod, 317L/N, 310S, 253MA, 330, 904L, S31254, XM-19, etc. 

Ferrite/Martensite Stainless Steel Grade:
TP410, TP405, TP420, TP430, TP430Ti, TP403, TP409, TP444, TP439, TP446, etc. 

Duplex/Super Duplex Stainless Steel Grade:
S31803, S32304, S31500, S32550, S32750, S32760, etc. 
Corporate Culture:
We focus on Quality First, Quality Traceability, and Quality Stability!
We focus on Customer First, People First, and Quality-Oriented!
Success:
First factory started in 1997, in the name of Torich , now covers 50000 square meters of factory building, with more than 100employees, and over 45 million RBM assets.
In 2008, we started the company of Torich International Limited for international business and marketing.
Welcome partners from all over the world for long term cooperation!