20W 30W Desktop Optical Fiber Laser Marking Machine For Metal and
Non-metallic
| Laser power | 20W 30W |
| Laser source | Raycus |
| Control board | BJJCZ |
| Control software | JCZ Ezcad |
| Laser lifespan | 100,000 hours |
| Laser beam | 1064nm |
| Optical quality | m2≤2 |
| Repeat frequency | 20khz-100khz |
| Marking speed | ≤7000mm/s |
| Marking range | 110mm*110mm standard (optional) |
| Min.Line | 0.01mm |
| Repeat precision | ±0.003mm |
| Power consumption | ≤800w |
| Voltage | AC220V 50Hz |
| Cooling mode | Air cooling |
| Supported characters | Any fonts downloaded on computer |
| Supported format | DWG,DFX,BMP,JPG,PNG,TIF,PCX, TAG, GIF, PLT etc.. |
| Supported Bar code | CODE39, EAN, CODE128, Data Matrix, PDF417 etc.. |
1. All metals: gold, silver, titanium, copper, alloy, aluminum, steel, manganese
steel, magnesium, zinc, stainless steel, carbon steel / mild steel,
all kinds of alloy steel, electrolytic plate, brass plate,
galvanized sheet , Aluminum, all kinds of alloy plates, all kinds
of sheet metal, rare metals, coated metal, anodized aluminum and
other special surface treatment, electroplating the surface of the
aluminum-magnesium alloy surface oxygen decomposition
2. Non-metallic: non-metallic coating materials, industrial plastics, hard
plastics, rubber, ceramics, resins, cartons, leather, clothes ,
wood, paper, plexiglass, epoxy resin, acrylic resin, unsaturated
polyester resin material
The optical fiber laser marking machine USES the laser beam to mark
the surface of various substances permanently. The marking effect
is to show the deep material through the evaporation of the surface
material, or to "carve" the trace through the chemical and physical
changes of the surface material caused by the light, or to burn
part of the material by the light, showing all kinds of patterns,
characters, barcodes and other graphics that need to be etched.
Fiber laser marking machine 100W can have some cutting ability by
mark many times, many customer buy it to cut work of thin metal
sheet like silver, aluminum, brass, gold 0.5mm, 0.8mm, 1mm
thickness.
fiber laser marker can mark:
1. Metal: Aluminum, silver, brass, copper, stainless steel, gold,
iron, steel,Titanium,coating material, anodized or treated
metal,etc.
2. Nonmetal: Hard plastic, rubber, marble, granite, ceramic, ABS,
leather, electroplating materials, coating materials, epoxy,etc.
