Big 1000ml Water Tank Nicefeel Nasal Irrigation UV Light with
Different Color of Nozzles with Nozzles Storage
Nicefeel Multi-Speed Pulsating Nasal/Sinus Irrigation System with
variable flow rate control system specifically for nasal and sinus
irrigation. Not just a cleanse or rinse, the pulsating action is
clinically proven to make your sinus cilia – the body's first line
of defense against contagions, pollen, and foreign matter. This is
the serious but pleasant way to good sinus health in a medically
recognized (covered in dozens of medical journal articles) but
drug-free way.
Instructions for Nasal/Sinus Irrigation
Step 1: Plug the machine into the power source.
Step 2: Prepare solution: • Remove the water reservoir from the device
and open the lid. Fill the reservoir with 16 oz (480 ml) of
lukewarm water. Use only distilled, commercially bottled, or
previously boiled and cooled water. Filtered water is safe only if
it has been filtered through a 0.2-micron filter or reverse osmosis
system. Add 2 blue Neilmed Sinus Rinse mixture packets or one green
NeilMed Sinus Rinse mixture packet and mix thoroughly to fully
dissolve the mixture. We recommend that you do not use homemade
salt mixtures for nasal irrigation, as they may have inaccurate
concentrations and lead to inadequate relief, a burning or stinging
sensation, or even nasal congestion.
Step 3: Open the compartment on the top of the lid of the water reservoir
to locate the tips. Remove the nasal irrigator tip and insert into
irrigator handle.
Step 4: Remove irrigator handle and open front circular compartment to
access coiled tubing. Uncoil the tubing to the desired length to
allow irrigation handle to reach the nose.
Step 5: Use + and - controls to set the desired flow rate. We recommend
that you start with the lowest setting, and gradually increase the
flow rate as desired.
Step 6: Press the appropriate button for either continuous flow or
pulsatile flow irrigation.
Step 7: Turn the device on using the power button on the front control
panel. This will not start the stream of water.
Step 8: Start irrigating:
