2.0mm Fiber Optic Connector SC/APC Simplex Single Mode

SC/UPC Multimode Simplex Connector with 0.9mm White Boot - Beige

Brief Introduction:

Single mode SC/APC epoxy-polish connectors are specially designed to provide low insertion loss and back reflection, along with high precision and mechanical stability

SC fiber optic connectors are used for equipment cross-connects or interconnect in the backbone, horizontal and work area application.

Possible to directly splice with drop cable & Indoor cable.

Fiber Optic connectors Features and Advantages:

1. Splice point is inside of Connector, no need for extra splice fixtures.
2. Enhanced high quality with improved optical features (Insertion Loss & Return Loss)
3. Enhanced & improved high Tensile Strength (exceeding 60N)
4. Four parts can easily be assembled after splicing by the one-touch push-pull system. (optionally tighten a screw)
5. Satisfy the Vertical Burning Test. Materials Compliant with UL94V-0

Notes for Fiber Optic Connector Installation:

Besides different installation methods for different connector types, several things need to be paid attention to when installing fiber optic connectors, especially when a fiber patch cord has two different types of connectors, such as LC-SC fiber optic patch cord or FC-ST fiber optic patch cord.
The bared fiber must be thoroughly cleaned with fiber optic cleaning fluid. Never clean the fiber with dry tissue. Before the connection is made, the end of each fiber must have a smooth finish that is free of defects such as hackles, lips, and fractures.
The cable should be cut about one inch longer than the required finished length.
Be sure to use strippers made specifically for use with fiber rather than metal wire strippers because damage can occur and then weaken the fiber.

ST Connector Application of SC Connector:

1. Medium and long range optical transmission circuit, LAN, CATV, FA, OA
2. PC transmission system, measuring tools, etc.
3. FTTx Network

Technology Specification& Parameters:

Order Information:

More Fibre Optic Connector Types:

Who is Geehe Comm?

Geehe Comm was founded in 2006, and we have been in the Passive Optics field for more than 15 years.

We have previously focused on domestic trade OEM service for Brands in China and eventually achieved the industry's Top ten annual sales of more than 500 million.

Also OEM service for American and European brands from the 2016 year.

We have seen that today there are also many factories and wholesalers internationally. However, their level of craftsmanship and testing are still stuck in a few years ago.

In fact, the production equipment of testings has been upgraded in recent years, and Geehe Comm hopes our advanced technology can inject fresh blood into this market.

Consumers deserve a better Fiber patch cord.