RCAC20DD4 3/4" Normal Temperature K2034 DD Series electric control
Aluminium Alloy Pulse Valve
Description
High performance diaphragm valve with dresser nut ports. Available
with integral pilot or as remotely piloted valve. Outlet at 90° to
inlet.
Suitable for
Dust collector applications, in particular for reverse pulse jet
filter cleaning and its variations including bag filters, cartridge
filters, envelope filters, ceramic filters, and sintered metal
fibre filters.
Maintenance
Before conducting any maintenance activity on the system ensure
that components are fully isolated from pressure and power
supplies. Pressure and power should not be reapplied until the
valve has been fully assembled. Diaphragm and pilot inspection
should be conducted annually.
Approvals
Integrally piloted valves meet the requirements of:
. Atex II 2D Mechanical
. CSA (C&US)
C22.2 No. 139-1982 UL Std No. 429
. C-Tick - integral pilots
. EMC (89/336/CE) - integral pilots
Installation
1. Prepare supply and blowtube pipes to suit valve specification.
Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other
particulate.
3. Ensure supply air is clean and dry.
4. Mount valves to inlet pipes and blowtube to valves, ensuring no
excess thread sealant can enter the valve itself.
5. Make electrical connections to solenoid or connect RCA pilot
port to pilot valve (RCA valves only).
6. Apply moderate pressure to system and check for installation
leaks.
7. Fully pressurise system.
8. Test fire and listen for proper actuation and crisp pulse noise.
Pressure Range: 30(5)-860(125) kPA(Psi)
Temperature Range: Nitrite Seals: -40°C (-40°F) to 82°C(179.6°F) fluororubber Seals:
-29°C (-20.2°F) to 232°C (449.6°F)
Product pictures:
Serves time
0:00 - 23:59
From Monday to Sunday
Competitive Advantage
| Our product features | Our Services Guarantee: |
| 1) Competitive price | 1) Prompt respond (Reply with 24 hours) |
| 2) Good quality | 2) Free Samples (Customer pay for the delivery cost) |
| 3) Professional Packaging | 3) Registration support. |
| 4) Produce according to Customers’ instruction | 4) Photos/videos are available during production. |
| 5) None delay shipment | 5) Loading inspection, and send loading photos before shipment. |
Introduction
Electromagnetic pulse valve refers to the gas through the valve in
instantaneous once a electrical signal received. Just like pulse
phenomena, it has the change of the short fluctuation. Therefore it
is calls the pulse valve. The Industry standard definition of
electromagnetic pulse valve for electromagnetic pilot valve and
pulse valve together, diaphragm valve controlled by electrical
signals.
Working principle
Electrical pulse controller send input signals so that the
electromagnetic armature attracts the moving bar. Unclose the
balancing hole to release the pressure gas in the back cavity of
diaphragm quickly; the pressure gas in the front cavity holds up
the diaphragm to open the passage and the valve starts cleaning.
The pulse signal disappears and the spring of the armature works
immediately to resume the moving bar so as to close the balancing
hole. The pressure gas in the back cavity of the diaphragm and the
spring work together to close the passage the valve stops cleaning.
The damping hole in the diaphragm functions to damp the airflow
when the moving bar of armature holds up for balancing and to
transit the air to the back cavity as soon as the balancing hole is
shut to close the passage and stop cleaning.
