Black Color 24 GHz Frequency Low Cost High Reliability Parking Gate
Barrier Sensor Radar Detector
Radar Vehicle Detector Advantages
The Radar Vehicle Detector has the advantages of convenient
installation and maintenance, no need to damage
the road surface, no impact on vehicle access, advanced technology,
reliable and stable operation, high cost
performance, convenient setting of working distance, all-weather
and all-weather work, compatible with straight
poles and billboards/fence Advantages such as brake lever
application.
The barrier radar detector adopts standard 12V DC power supply,
which can adapt to the 6V~18V power supply
voltage range, adapt to large voltage fluctuations, and the power
supply current requirement is not large. It can be
directly powered by the barrier control panel, without the need for
a separate power supply device.
The schematic diagram of radar installation and connection is shown
in Figure
|
Center Frequency | | Horizontal Beam Width | 11° |
Vertical Beam Width | | Distance Adjustment Range | 2.0 m～6 m (8 levels) |
Response Time | 100ms | Vehicle Inspection Miss Rate | 0.1% |
Coverage Range | | Pedestrian Detection Miss Rate | 0.1% |
Signal Output | switching value | False Detection Rate | 0.05% |
Mechanical properties
Dimensions: 105 mm×78 mm×26 mm; ·
Weight: 85g; ·
Waterproof: IP65
Supply Voltage Range: DC 6V～18V
Supply Current: less than 90 mA/12V. ·
Operating temperature: -40℃～+85℃; ·
Humidity: relative humidity 99% at 25℃.
MAIN FEATURES
Detection Accuracy
With millimeter wave working signal, radar detector has high
working frequency, directional accuracy and strong
anti-interference and so on excellent performance. The detection
rate of different types of vehicles (including cars,
trucks, and aluminum vehicles) is higher than 99.9%. The detection
rate of pedestrians is higher than 99.9%.
Low Cost to Install and Maintain(no need to damage the road
surface)
The car radar detector is easy to install, maintenance-free, highly
reliable and easy to replace. It not only overcomes
the problems of high construction cost and maintenance difficulties
for the installation of the ground sense coil that
needs to damage the road surface by personnel, but also solves the
problem of barrier rod control.
Convenient Power Supply
The car radar detector adopts standard 12V DC power supply, which
can adapt to the 6V~18V power supply voltage
range, adapt to large voltage fluctuations, and the power supply
current requirement is not large. It can be directly
powered by the barrier control panel, without the need for a
separate power supply device.
All-weather Work
The working signal of the car radar detector is in the millimeter
wave frequency band, with no need for special heat
dissipation. Under the weather conditions such as rain, snow, hail,
haze, etc., it has the ability to work continuously
day and night. The detector shell has IP-65 waterproof
requirements, there is no need to worry about rainwater
entering the radar and causing radar damage.
