Scaffold Safety Frame Round Hole Formwork Screen For High Building
Scaffold safety formwork screen, also known as external steel nets,
are commonly used in high-rise construction sites around the world,
especially when building high-rise buildings with more than 15
floors. After the overall erection and installation on the ground,
they begin to climb up layer by layer. Workers work in the internal
space of the closed climbing nets, preventing the falling danger of
people and objects and greatly improving safety, It is an
indispensable building safety protection network in the 21st
century.
As the scaffold safety formwork screen is made of metal, the cost
is higher than that of the traditional plastic safety net. However,
since the climbing net can climb automatically and does not need to
be built on the periphery of the whole building, from this point of
view, the climbing net can save money. In addition, the external
metal climbing net can be used many times once purchased, which
reduces the use cost again.
Let's first talk about the mesh of punching plate: there are holes
with different apertures such as 5mm, 6mm and 8mm, and the hole
spacing includes 4 spacing, 5 spacing and 6 spacing. The mesh is
generally round.
Material: at present, the most commonly used material is to use
galvanized sheet to cut and punch holes, then weld the net frame
support, and finally spray plastic on the surface of the climbing
frame formwork screen, which is the most economical and durable
material after all.
Color: the most commonly used is blue, followed by green and
yellow.
Overall dimensions: 1m * 2m, 1.5m * 1.8m, 1.2m * 2m, etc.
Plate thickness: 0.4mm-1.2mm.
