Beryllium Material CDA174 (UNS.C17410) Copper Alloy Strip With
Excellent Hot Working Ability
Product Name: Beryllium material copper alloy strip
Grade: CDA174 (UNS.C17410)
Size: 0.25mmx200mm, Or as customers' requirement
State: 1/2 HT(TH02), HT(TH04)
Chemical Composition of CDA174 (UNS.C17410) Copper Alloy:
| Element | Content (%) |
|---|
| Cobalt, Co | 0.35-0.60 |
| Silicon, Si | 0.20 |
| Aluminum, Al | 0.20 |
| Iron, Fe | 0.20 |
| Beryllium, Be | 0.15-0.50 |
| Copper, Cu | Balance |
Forms Available
Alloy 174 mill hardened strip is available in widths ranging from
1mm~300mm and in thicknesses ranging from 0.02 to 2.5mm.
Typical application of CDA174 (UNS.C17410) Copper Alloy Strips:
Bearings
Plastic molds
Welding electrodes
Current-carrying springs
Corrosioin resistant components
Precision screw machined parts
Connectors for appliances and consumer electronics
| Related material specifications of CDA174 (UNS.C17410) Copper Alloy |
| Strips | ASTM B768, B888 |
| Sheets | ASTM B768, B888 |
Typical Physical Properties of CDA174 (UNS.C17410) Copper Alloy:
| Elastic Modulus | Melting Point (Solidus) | Electrical Conductivity/ Resistivity | Density | Thermal Expansion Coefficient | Thermal Conductivity (25 °C) |
| 138 GPa | 1020 °C | 2.9-3.8 μΩcm | 8.80 g/cm3 | 17.6 x 10-6 m/m °C | 230 W/ m K |
MECHANICAL PROPERTIES of CDA174 (UNS.C17410) Copper Alloy Strip:
| | 0.2% Offset Yield Strength (min) | Ultimate Tensile Strength (min) | Elongation (min) | |
| Temper | Hardness |
| | ksi | MPa | ksi | MPa | % | HV |
1/2HT(TH02) | 80 - 100 | 550 - 690 | 95 - 115 | 665 - 790 | 10~20 | 180 - 230 |
| HT(TH04) | 100 - 120 | 690 - 830 | 110 - 130 | 760 - 895 | 7~17 | 210 - 278 |
Product Photo:
FAQ:
Q1:Could you produce Beryllium Copper strip by Mill Hardened
process.
A1:Yes, we could produce AM(TM00), 1/2HM(TM01).HM(TM04) XHM(TM06)
XHMS(TM08).,we are the only factory could do mill harden strip in
China.
Q2: What’s the advantages the Beryllium Copper of CUBERYLLIUM®.
A2: 1: The Biggest Coil weight could be reach 1200kg/Coil
2:We are the only one who melting by Vacuum semi-Continuous
Furnace.
3:Surface further polishing for top clients.
Q3: Why you melting by Vacuum semi-Continuous Furnace.
A3:Could be get the Cast ingot without gas,smaller segregation,
Grain Refinement
Q4: What's the payment terms?
A4: We accept T/T, L/C, Paypal etc. It can be negotiated when the
amount is different.
