CuCo2Be - C17500 Cobalt Beryllium Copper Wire Thickness 0.1mm On
Spools
Product Description:
Name: Cobalt beryllium copper wire
Grade: CuCo2Be - C17500
Specification: Thickness 0.08mm-6mm
Surface: Bright
State: A(TB00), H(TD04), AT(TF00), HT(TH04)
Features: High conductivity
Application: For Electronic connectors
CUBERYLLIUM® manufactures copper beryllium in several distinct compositions.
These fall into two categories: alloys selected for high strength
(Alloys 172,173,170) and alloys selected for high conductivity
(Alloys 751,750,741). And Gost standard QBe2,QBe1.9Ti for Russia
Market. Also Supply Master alloy : CuBeryllium-200;
CuBeryllium-275);CuBeryllium-350 and Cuberyllium-400 to global
factory.
CUBERYLLIUM ®-750 also named -C17500 (CDA 750) combine moderate yield strength, up to 960Mpa(140ksi), with
electrical and thermal conductivity from 45 to 60 % of pure copper.
Alloys 750 and 751 are available in wrought product forms and can
be supplied fully hardened. Hardened products are identified by the
temper designation AT or HT, and have good formability.
Chemical Composition of CuCo2Be - C17500 Cobalt Beryllium Copper Alloy:
| CUBERYLLIUM® Brand | UNS-Number | Beryllium | Cobalt | Fe | Si | Copper |
| Cuberyllium-C750 | C17500 | 0.40-0.70 | 2.4～2.7 | <0.1 | <0.2 | Balance |
Note: Copper plus additions equal 99.5% Min.
Typical Physical Properties of CuCo2Be - C17500 Cobalt Beryllium Copper Alloy:
| Density | 8.83 | g/cm3 |
| Density before age hardening | 8.75 | g/cm3 |
| Melting Range | 1000~1070 | ℃ |
| Elastic Modulus | 14.1 | (kg/mm2 (103) |
| Thermal Expansion Coefficient | 18 x 10 -6 | 20 °C to 200 °C m/m/°C |
| Thermal Conductivity | 0.48 | cal/(cm-s-°C) |
Mechanical and Electrical Properties of CuCo2Be - C17500 Cobalt Beryllium Copper Alloy:
| Properties | Metric | Imperial |
|---|
| Hardness, Rockwell B (any thickness) | 90.0 | 90.0 |
| Tensile strength at break (@thickness ≥50.8 mm/ @thickness 2.00 in) | 607 MPa | 88000 psi |
| Tensile strength at break 9@thickness 25.4-50.8 mm/ @thickness
1.00-2.00 in) | 621 MPa | 90000 psi |
| Tensile strength at break (@thickness 25.4 mm/ @thickness 1.00 in) | 648 MPa | 94000 psi |
| Tensile strength, yield (@strain 0.500 %, thickness ≥50.8 mm/
@strain 0.500%, thickness 2.00 in) | 607 MPa | 88000 psi |
| Tensile strength, yield (@strain 0.500%, thickness 25.4-50.8 mm/
@Strain 0.500%, thickness 1.00 - 2.00 in) | 621 MPa | 90000 psi |
| Tensile strength, yield (@strain 0.500%, thickness 25.4 mm/ @Strain
0.500 %, thickness 1.00 in) | 648 MPa | 94000 psi |
| Modulus of elasticity | 131 GPa | 19000 ksi |
| Poissons ratio | 0.267 | 0.267 |
| Shear modulus | 51.7 GPa | 7500 ksi |
Related Material Specifications of CuCo2Be - C17500 Cobalt Beryllium Copper Alloy:
Wires: ASTM B441
Rods/Bars/Tubes: ASTM B441, SAE J461, 463; RWMA Class 3
Strips: ASTM B534
Sheets: ASTM B534
Plates: ASTM B534, SAE J461, RWMA Class 3
European Standards: CuCo2Be, CuCoBe, UNS. C17500, Alloy 10, DIN
2.1285, CW104C to EN
Note:
ASTM: American Society for Testing and Materials
SAE: Society of Automotive Engineers
AMS: Aerospace Materials Specification(Published by SEA)
RWMA: Resistance Welder Manufacturers' Association
Note: Unless otherwise specified, material will be produced by
ASTM.
Typical Applications of CuCo2Be - C17500 Cobalt Beryllium Copper Alloy:
| • Bearings and bushes |
| • Plastic moulds |
| • Corrosion resistant components |
| • Current carrying springs |
| • Welding electrodes |
| • Electrical and electronic connectors |
Product Photo:
Weldability
Soldering, brazing, gas shielded arc welding, coated metal arc
welding, spot welding, seam welding and butt welding are all
recommended
Hot & Cold Workability
Good hot working properties. Excellent cold working properties.
Key Technology of Beryllium Copper(Heat treatment)
Age Hardening
Age hardening significantly enhances the material’s strength. This
reaction is generally carried out at temperatures between 260°C and
540°C depending on alloy and desired characteristics. This cycle
causes the dissolved beryllium to precipitate as a beryllium rich
(gamma) phase in the matrix and at the grain boundaries. It is the
formation of this precipitate which causes the large increase in
material strength. The level of mechanical properties attained is
determined by the temperature and time at temperature. It should be
recognized that beryllium copper has no room temperature aging
characteristics.
FAQ:
Q1:Could you produce Beryllium Copper strip by Mill Hardened
process.
A1:Yes, we could produce AM(TM00), 1/2HM(TM01).HM(TM04) XHM(TM06)
XHMS(TM08).,we are the only factory could do harden strip in China.
Q2: What’s the advantages the Beryllium Copper of CUBERYLLIUM®.
A2: 1: The Biggest Coil weight could be reach 1200kg/Coil
2:We are the only one who melting by Vacuum semi-Continuous
Furnace.
3:Surface further polishing for top clients.
Q3: Why you melting by Vacuum semi-Continuous Furnace.
A3:Could be get the Cast ingot without gas,smaller segregation,
Grain Refinement
Q4: What's the payment terms?
A4: We accept T/T, L/C, Paypal etc. It can be negotiated when the
amount is different.
