Automatic Servo Feeding Upright Mesh Welding Device
Model: ALZ350-14-1600 l
Welding power source: IF DC 350KVA*2 l
Maximum welding current: 43000A l
Maximum welding capacity: iron wire 7mm*7mm*10 points l
Pressurized cylinder: 80 times with 12 sets of power cylinder
Effective welding platform width: 1600mm 1520*1520mm max
Welding speed: 2 times/second
Main accessories
1. Intermediate frequency transformer: 350KVA*2,
2. Maximum welding current: 43000A/piece
3. The maximum short-circuit current is 53000A, the input power is
500V/1000HZ
4 the cooling water flow and temperature are 60L/min, and the
temperature is 10-35℃. Intermediate frequency controller: model
HBII-900A, maximum output current 500V/1000HZ/1600A.
Into the power supply three 220V/60Hz. Cooling water flow and
temperature, 30L/min 10－35℃.
Servo Feeding device
Model: ATQ1600－1600
Feeding speed: 1 m/s, strive for 1.5 m/s.
Mold changing method: fully automatic with and demolding system
PLC: Mitsubishi of Japan
Servo motor: Taiwan TECO 1KW*2
Man-machine interface: Taiwan Weilun
Working mode: one-key automatic
The main frame of the workbench is made of 80*80 aluminum profile
Wire straightening device
Model: ABT5-9/3 meter gun l
Wire diameter range: 5.0mm-9.0mm l
Length range: 50mm-3000mm l
Length tolerance: ≤0.5mm l
Feeding speed: ≤25 m/min l
Automatic controller: Yes
1, Set the number and count, and the production is complete and
stop and alarm.
2. It will automatically stop and alarm when there is no material,
broken wire or running wire.
Application:
