Customized Tungsten Alloy Products Premium Tungsten Alloy Bars

Tungsten Copper Alloy Bar Buy Premium Tungsten Alloy Bars

Tungsten Copper Alloy Bar combines the advantages of copper and tungsten, high strength / high specific gravity / high temperature resistance / arc ablation resistance / good conductivity / good processability. Ang tungsten copper alloy adopts high-quality tungsten powder and oxygen-free copper powder, and applies isostatic pressing - (high-temperature sintering) - copper infiltration to ensure product purity and accurate ratio, fine structure and excellent performance. The copper tungsten of our company is a domestic high-quality tungsten copper alloy material, which is very suitable for high hardness materials and sheet electrode EDM. The surface finish of EDM products is high, the precision is high, and the loss is low, which can effectively save electrode materials, improve the EDM speed and improve the die accuracy. It can also be used as spot welding / touch welding electrode. Tungsten copper is welded with die steel, which is very convenient for the use of electrode.

Tungsten Copper Alloy Bar are mainly used in:

1. Electrode material: it is applied to discharge machining of high hardness materials and Pu sheet electrodes. The machined products have high surface finish, high precision, low loss and effective saving.

2. Contact material: arc contact and vacuum contact of high and medium voltage switch or circuit breaker, circuit board welding and electrical contact point.

3. Welding materials: submerged arc welding machine, gas shielded welding machine, welding nozzle, radio resistance factory (production of carbon film resistance, metal coating resistance) resistance butt welding machine collision welding materials (copper tungsten alloy welding disc).

4. Guide and guard materials: various wire rod rolled steel, used for guiding and protecting materials [1].

Tungsten Copper Alloy Bar Picture:

Electrical materials

Tungsten copper alloy electrical materials: mainly divided into electrical contact materials and electrical processing materials.

(1) Electrical contact materials. This is the most important kind of electrical materials. They have high arc ablation resistance and fusion welding resistance. They are used as electrical contacts, electrical contacts and electrodes in various high and low voltage switchgear and some instruments. Electrical contacts are the category with the largest application of tungsten copper materials, especially tungsten copper materials with copper content of 20% ~ 40%. They are mainly used in switching appliances with medium and high voltage and medium and high current, such as protective circuit breaker contacts and other contacts and contacts of power transmission network. Tungsten copper contacts containing 15% ~ 20% Cu can be used on circuit breakers with voltages up to 500000 V or higher.

(2) Electrical processing materials. It refers to the electrode and die materials used in resistance welding, electric riveting, electric upsetting and EDM. EDM requires that electrode or die materials have good conductivity and arc ablation resistance to ensure machining accuracy, so tungsten copper materials are mostly used. Resistance welding also uses tungsten copper materials. Electric riveting and electric upsetting also use tungsten copper materials in some cases.

Instantaneous high temperature material

Instantaneous high temperature material is an important and special tungsten copper material, which can be used at temperatures close to and slightly higher than the tungsten melting point. The working time is very short, and the mission can be completed in a few seconds to 200 seconds, so it is called instantaneous high temperature material. This kind of material is mainly used to manufacture high-temperature components of spacecraft, such as rocket nozzle, gas rudder guiding missile flight direction, missile end (head cone, nose cone) and other components. Ablation resistance and thermal shock resistance are the most important performance of instantaneous high temperature materials, because the gas temperature of solid fuel is generally as high as 2700 ~ 3300 ℃, and the gas flow contains a large number of solid particles, which has a serious scouring and ablation effect on nozzle, gas rudder and other components; Moreover, these components work under the condition of rapid temperature rise (rising to the working temperature in a few seconds), so they produce intense thermal shock damage to the components. For the terminal, when the aircraft flies into space and then enters the atmosphere, it is subjected to intense friction by particle clouds due to its high speed, resulting in high temperature and erosion. Tungsten copper material is a good material that can meet the above requirements.

With the successful development of carbon carbon (C-C) fiber composite, it is more and more used to manufacture rocket nozzle throat lining because of its light weight and good thermal shock resistance. However, its ablation resistance is far inferior to that of tungsten copper materials. Tungsten based materials are still needed for nozzle throat lining, gas rudder and other parts that require high ablation resistance.

Armor breaking material

Tungsten copper material can be used as armor breaking material, that is, a so-called "shaped charge" material. A cup-shaped or funnel-shaped cover made of tungsten copper material (commonly used w-30cu material) is inversely installed at the front end of the ammunition Jane. The cover is transformed into a jet by the temperature and pressure of gunpowder. This liner was first made of red copper and was widely used. In order to increase the unit mass of the cover and improve the armor breaking ability, a tungsten cutter shaped charge cover with a unit mass larger than that of red copper was later developed. Under ideal conditions, it can improve the armor breaking ability by about 30% compared with that of red copper cover.

Specifications of Tungsten Copper Alloy Bar Buy Premium Tungsten Alloy Bars:

JINXING MATECH is a research and development, production, processing and sales of integrated, comprehensive refractory metal, precious metal material manufacturer.JINXING MATECH is an expert provider on the metal solution. Especially on the products such as Tungsten , Tungsten copper , Titanium , Zirconium, Vanadium, Hafnium, Sputtering Target , Nickel base alloy, Cobalt base alloys etc, products quality supplied according to ASTM , ASME , AMS , MIL , ISO , DIN and EN Standard which mainly used in Semiconductor, Petro-Chemical, Solor , Medical , Aerospace, Military industries.

So far JINXING MATECH's has attracted more than 50 countries customers in We mainly supply to the Market such as Canada, Sweden, Italy, Denmark, India, New Zealand , Mexico, South Korea , Netherland , Australia , India and Southeast Asia coutries sand many other countries and regions by reliable qualities, professional service and cost effective pricing. JINXING MATECH's production and inspection equipments include 100tons Hydraulic press, 20 tons Automation Controls Press, Vacuum Pressure Sintering Furnace , Electro-sparking wire cut machine ,powder metal Mixer, Granulation Drum, Hydrogen Sintering Furnace, Rochwell and Brinell hardness meters ,Metallocope , carbon and oxygen analyser etc.. JINXING MATECH's has 8,000 square meters construction area as well as two workshops ,JINXING MATECH people keep improving products quality and inspect the density, hardness and composition of finished products strictly, which ensures every product meets customers' requirements.

Technology Process

Strong manufacturing capabilities along with a full-scale R&D and test lab give us the ability to fully control all process of raw materials preparing, manufacturing, inspection, packing and delivery.

Our success is built on long-standing customer relationships, the quality of our sputtering targets and the level of technical and logistic services and sensitivity to economic, political and environmental issues. Within our organization, we are continually challenging our own performance.

All of our core technical team members have more than 10 years professional experience of both R&D and high volume manufacturing. Our business operations and logistics team is staffed with experienced professionals to provide friendly and timely support and services to our customers.

Quality Assurance

Special Metals Fabrication is an ISO 9001: 2015 accredited company. Our attitude to quality assurance means we are continually striving to improve our company and to ensure we are working to the highest possible standards.

Quality is a big part of every day at Special Metals Fabrication. Each service we offer has its own team of experts, making sure everything we offer complies within the standards we have set.