Compound Fertilizer Processing and Crushing Machine with few dust
Special Grinder
1. Introduction
It belongs to the special grinder for the fertilizer industry. The
machine has compact structure, small footprint, convenient
operation and low energy consumption. The main components require
high processing precision, strong crushing ability, high
efficiency, and high wear resistance of the working surface. The
crushing mesh can be adjusted, there is no agglomeration after
crushing, and the dust at the inlet and outlet is small. Material:
There are many models of carbon steel, contact material 304
stainless steel, all 304 stainless steel for customers to choose
from.
2. Wide Application
This equipment is mainly used for pulverizing granular urea, and
can also be used for pulverizing other single fertilizers. It is
widely used in the production of high nitrogen in compound
fertilizer plants, the production of flushing fertilizers, and the
production of water-soluble fertilizers; it is also suitable for
feed production.
3. Structural features
The two rollers rotate towards each other to squeeze and grind the
material. The smashing speed is fast, the roller is not sticky, the
operation is simple and reliable, there is no wearing parts, no
dust, and no auxiliary dust removal equipment is required. The feed
port is equipped with a broken tooth roller, even if there is a
small amount of agglomeration, it will not be blocked and work
continuously. This equipment can be made into fixed and mobile
according to customer requirements
4. Technical parameters
| type | power | feeding moisture | capacity | final size |
| UF650 | 18.5KW | Less than 5% | 3-5t/h | less than 0.5mm |
| UF850 | 22KW | Less than 5% | 6-10t/h | less than 0.5mm |
welcome you to contact us on the urea crusher, urea grinder, urea
crushing or breaking machine.
