Equipment summary:
Salt Spray Corrosion Chamber used to test the corrosive resistance
of products whose the surface was treated with paint,
electroplating, inorganic and organic film, anode handling,
anti-rust oil,etc.
Corresponding standard :
1. GB/T 2423.17-1993 salt spray test
2. GB/T 2423.18-2000 salt spray test
3. GB/T 10125-1997 salt spray test
4. ASTM.B117-97 salt spray test
5. JIS H8502 salt spray test
6. IEC68-2-11 salt spray test
7. IEC68-2-52 1996 salt spray test
8. GB.10587-89 salt spray test
9. CNS.4158 salt spray test
10. CNS.4159 CASS Accelerated acetic acid copper salt spray test
11.. GB/T 12967.3-91 CASS Accelerated acetic acid copper salt spray
test
Technical parameters:
| Model | BT-6001C | BT-6001B | BT-6001A |
| Inside box size(cm) | 60x45x40 | 90x60x50 | 120x80x50 |
| Outside box size(cm) | 107x60x118 | 141x88x128 | 190x110x140 |
| Testing room temperature | Salt test (NSS ACSS)35℃±1℃/ Corrosion Test (CASS)50℃±1℃ |
| Pressure barrel temperature | Salt test (NSS ACSS)47℃±1℃/ Corrosion Test (CASS)63℃±1℃ |
| Brine temperature | 35℃±1℃ 50℃±1℃ |
| Testing room Capacity | 108L | 270L | 480L |
| Brine tank capacity | 15L | 25L | 40L |
| Salt concentration | The concentration of sodium chloride 5% or the 5% concentration of
sodium chloride add 0.26g per liter of copper chloride (CuCl2 2H2O) |
| Air pressure | 1.00±0.01kgf/cm2 |
| Spray volume | 1.0~2.0ml/80cm2/h (working at least 16 hours, and then take the
average) |
| Testing room relative humidity | 85% above |
| PH | 6.5~7.2 3.0~3.2 |
| Spray form | Programmable spray (Including continuous and intermittent spray) |
| power | AC220V1Φ10A | AC220V1Φ15A | AC220V1Φ20A |
Detailed configurations as follows:
1, according to CNS JIS ASTM GB2423.19 specifications, can be set
constant temperature to control
(A) Salt spray test: NSS, ACSS
1. testing room : 35 ℃ ± 1 ℃
2 saturated air barrels : 47 ℃ ± 1 ℃
(B) anti-corrosion test: CASS (copper acetate)
1. testing room: 50 ℃ ± 1 ℃
2 saturated air barrels: 63 ℃ ± 1 ℃
2, air supply system: air pressure 1Kg/cm2 Two-stage adjustments
(coarse / fine-tuning).
(A) the first paragraph for the rough adjustment 2-2.5Kg/cm2, the
second paragraph to fine-tune 1Kg/cm2.
(B) Testing configuration is switch connector designed for SO2.
3, spray form:
(A) Using Bo Nute principle to draw brine and then saline spray,
atomization uniform, non-blocking and crystallization, so that
ensure continuous spraying.
(B) Nozzle: The nozzle is made of special glass, adjust spray
volume and spray angle.
(C) spray volume: Adjustable 1 ~ 2ml (80cm2/hr) (average of 16-hour
volume).
4, heating devices:
By direct heating, warming up faster and reduction of standby time,
when the temperature arrives automatically switch ON / OFF, make
temperature accuracy, low power consumption (heating tube is made
of titanium alloy).
5, add water systems:
Using automatic water replenishment system, automatic replenishment
when the water level is too low.
6, safe protective device:
(A) low water level, automatically cut off power supply.
(B) over-temperature, automatic cut off the power supply.
(C) attached to the safe warning light device.
Production Process
Factory Inspection
We control quality from the materials, electronic parts,
controller,comppressor, solenoid valve, and many parts of the
products.
Workshop Machine
Packing&Shipping
Our Services
During the whole business process, we offer Consultative Selling
service.
1) Customer inquiry process:
Discussing testing requirements and technical details, suggested
suitable products to customer to confirm. Then quote most suitable
price according to customer requirements.
2) Specifications customize process:
Drawing related drawings to confirm with customer for customized
requirements. Offer reference photos to show the products
appearance. Then, confirm the final solution and confirm final
price with customer.
3) Production and delivery process:
We will produce the machines according to confirmed PO
requirements. Offering photos to show production process.
After finish production, offer photos to customer to confirm again
with the machine. Then do own factory calibration or third party
calibration(as customer requirements). Check and test all the
details and then arrange packing.
Deliver the products in confirmed shipping time and inform
customer.
4) Installation and after sale service:
Defines installing those products in the field and providing
after-sales support.
