304 316 1 Um - 300 Um Stainless Steel Factory Direct Supply Filter
Metal Filter Element
Multi-layer metal sintered mesh is a new type of filter material
with a certain strength and overall rigidity, which is a new type
of filter material with a certain strength and overall rigidity,
which is laminated and sintered by a multi-layer metal wire woven
mesh.
The hole is easy to deform and unstable, and its comprehensive
performance is higher than that of metal powder sintered, ceramic,
metal fiber sintered filter felt and other products. Used in
petroleum, energy, electric power, electronics and other fields.
1. Metal Filter Element Deep filtering:
The particles are captured in the deep layer of the filter
material, not just on the surface. This kind of filter material is
mostly composed of fibers, such as fiber sintered filter material
and resin sintered filter material.
Its accuracy is generally called the nominal accuracy.
Two, filter classification cartridge filter materials are
collectively referred to as filter cartridges, which can be divided
into two categories: non-metallic and metallic.
Among them, non-metals are divided into: fiber sintering, fiber
winding and polypropylene folding. Metals are divided into: fiber
sintering, powder sintering, wire mesh folding, and multilayer mesh
sintering.
The difference between deep filtration and surface filtration: The
depth filtration type is mostly disposable, while the surface type
can be cleaned and reused.
The amount of trapped impurities of the deep type is usually much
greater than that of the surface type, so the single use cycle is
longer. Depth filtration and surface filtration have a large
difference in pressure drop and flow rate.
The surface filtration is closer to the *pair filtration, and the
depth type is mostly the nominal accuracy.
The surface type is generally not suitable for the filtration of
soft and fiber impurities, while the depth type is suitable for the
filtration of hard, soft and fiber impurities.
2. Metal Filter Element Product use: 1. Used as a dispersive cooling material in a warm environment; 2.
Used for gas distribution, fluidized bed orifice material; 3. Used
as high temperature filter material; 4. Used for high pressure backwash.
Metal Filter Element Features
1) Sintering filter high strength: five layer screen sintering,
high mechanical strength and compressive strength;
2) Sintering filter high precision: 2-200 um filtering particle
size all can play uniformity of surface filtration performance;
3) Sintering filter heat resistance: but durable from - 200 degrees
at most 650 degree continuous filtration;
4) Sintering filterclean sex: because the current good cleaning
effect and surface filter structure, simple cleaning.
Main application: 1) Sintering filter used in high temperature
environment dispersion cooling materials;
2) Sintering filter used in gas distribution, liquid fluidized bed
orifice plate materials;
3) Sintering filter used for high precision, high reliability and
high temperature filtration materials;
4) Sintering filter used for high pressure reverse flushing oil
filter.
Metal Filter Element Specifications
| Name | Stainless Steel Mesh Filter Cylinder |
| Material | 304/316/316L/Monel/Deplex/Hastelloy |
| Micron Rate | 1-300um |
| Standard Size | φ25*1000 φ30*1000 φ40*1000 φ50*1000 φ60*508 φ70*1000 etc |
| Thickness | 1.7 mm |
| Operating Temperature | -200~600℃ |
| Feature | High strength and rigidity,Uniform and stable precision,Cleanable |
| Standard Length | 5" 10" 20" 30" 40" |
| Gaskets and o-rings | EPDM, Nitrile,PTFE , Silicone, Viton and PFTE coated etc or by process selection . |
| End Fittings and connections | Standard interface, such as 222, 220, 226, Fast interface Flange connection Tie rod connection Threaded connection Customized connection |
