320T/H CQM Mixing Tower , Highway Stationary Asphalt Mixing Plant

» What's is asphalt mixing plant

With the rapid development of highway construction in China, the demand for highway quality is getting higher and higher. The quality of asphalt road surface mainly depends on the quality of asphalt concrete mixing and pavement paving.
Asphalt concrete mixing equipment in China is mainly intermittent asphalt mixing plant.
320t/h The working principle of batch asphalt mixing plant is, the control room sends work order, then all kinds of cold materials according to the requirement of the primary distribution, are sent by the transmission system to the dryer. After drying, they are screened twice by vibrating screen. Use electronic weighing to weigh aggregate and mineral powder and bitumen, and then pull them in cylinder in order and stir evenly into finished aggregate. The conveying, drying and screening of aggregate are continuous, and the measurement and mixing of various materials are carried out according to the cycle. Therefore, compared with continuous asphalt mixing station, it has the advantages of good aggregate gradation control and stable asphalt dosage.

» Technical Parameters of Asphalt Mixing Plant

» Features of Asphalt Mixing Plant 320t/h


High heat exchange efficiency, up to 90%, low fuel consumption, low gas consumption, reasonable insulation design, greatly reduce the heat loss of equipment. Soot emission is in accordance with European standards to meet environmental requirements.

According to the process flow (mixing mode) the plant can be divided into: continuous drum type and batch type.
Batch type, that is, heating and drying of aggregates and mixing of mixtures is forced periodically. Stir one pot at a time and each pot is stirred for 45 seconds. The output depends on the equipment model.

» Components of the equipment

1. Cold feeder system (9m3 ×4bins)
2. Dryer drum system
3. Hot elevator
4. Vibration screen system
5. Aggregate hot bin system
6. Weighting and mixing system
7. Dust filter system
8. Reclaimed filler system
9. Foreign filler silo
10. Control room system
11. Attachment distribution and installation
12. Pneumatic system
13. Asphalt heating system

320t/h
Reach out to us for a complimentary consultation.

Jiangsu Yima Road Construction Machinery Technology Co., LTD is one of Chinese manufacturers of asphalt mixing plant. Company is 5 kilometers away from Changzhou exit of Shanghai-Nanjing Expressway.

Yima asphalt mixing plants cover CSM80, CSM120, CSM160, CSM240, CSM320, CSM400 series. Yima absorbs international advanced technology of plant, 100% ISO containerized asphalt mixing plant not only reduces the costs, consists the environmental protection, but also has absolute advantage in the guss asphalt construction.

Yima obtained BV, GOST, ISO 9001, CE, National inspection and New Practical Patent Certificates. In the future, Jiangsu YIMA will service road building all of the world with more professional team, better products, and more attentive after-service.

Jiangsu Yima: Create value, Work together!