Low Coating Temperature Hot Melt Adhesive For Nonwoven Tape Manufacturing

Hot Melt Industrial Zinc Oxide Adhesive For Nonwoven Tape Manufacturing

OPERATING GUIDES
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 180 0 C
for both, depending on machines, substrates, and plant conditions.

FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.

PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.

STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 0 C and above 5 0 C.
Direct sunlight and moisture condensation must be prevented.

OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal
protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is
suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.

Our Certificate

Shanghai Jaour attracts a team of experienced elitists in the hot melt adhesive industry. The company specializes in pressure-sensitive hot melt adhesives for nonwoven disposables, medical products, industrial tapes and labels, waterproofing membranes, and automotive applications, providing comprehensive services that include research and development, manufacturing, sales, and after-sales support.

Vision, Mission, Core Values

Production Capacity

Our clients