Wire electric cord wire 2 core cable PVC insulated flexible power
cable H05V2V2-F cable
With their special insulation and sheath compounds H05V2V2-F cables
are adapt for apparatus in kitchen and heating and for use in zones
with high temperature (like lighting system apparatuses) without
contact with warm parts and radiations. Unsuitable for outdoor use,
in industrial and agricultural buildings or non-domestic portable
tools. The maximum conductor temperature in normal use: 90°C.While
high temperature use, skin contact must be avoided.
* Flexible cables Construction
– Annealed Plain Copper Conductor (Class 5)
– PVC-90 or Heat Resistant PVC Insulation
– PVC-90 or Heat Resistant PVC Sheath
* Flexible cables Applicable Standards
– EN 50525-2-11:2011 ; IEC 60227
Operating Temperature
– 90°C for general purpose cables
* Flexible cables Application
– For household appliances under medium mechanical stress in damp &
wet conditions.
* Characteristics
– Working voltage: 300/500 volts
– Test voltage: 2000 volts
– Flexing bending radius: 15 x Ø
– Static bending radius: 4 x Ø
– Flexing temperature: -15º C to +90º C
– Short circuit temperature: +160º C
– Insulation resistance: 20 MΩ x km
Type H05V2V2‐F
Rated Voltage 300/500 V
Product Range
2 core – 0.75 to 4 mm2
3 core – 0.75 to 4 mm2
4 core – 0.75 to 4 mm2
5 core – 0.75 to 4 mm2
2 CORE CABLE PHYSICAL AND ELECTRICAL CHARACTERISTICS
| Cross section of conductor(mm²) | Conductor structure(mm) | Insulation thickness(mm) | Sheath thickness(mm) | Approx. cable diameter(mm) | Max resistance of conductor at 20℃ (Ω/km) |
| 2×0.75 | 24/0.19 | 0.6 | 0.8 | 6.2±0.2 | 19.5 |
| 2×1 | 32/0.19 | 0.6 | 0.8 | 6.6±0.2 | 13.3 |
| 2×1.5 | 30/0.24 | 0.7 | 0.8 | 7.6±0.2 | 7.98 |
| 2×2.5 | 49/0.24 | 0.8 | 1.0 | 9.2±0.2 | 4.95 |
| 2×4 | 56/0.29 | 0.8 | 1.1 | 10.6±0.2 | 19.5 |
3 CORE CABLE PHYSICAL AND ELECTRICAL CHARACTERISTICS
| Cross section of conductor(mm²) | Conductor structure(mm) | Insulation thickness(mm) | Sheath thickness(mm) | Approx. cable diameter(mm) | Max resistance of conductor at 20℃ (Ω/km) |
| 3×0.75 | 24/0.19 | 0.6 | 0.8 | 6.6±0.2 | 13.3 |
| 3×1 | 32/0.19 | 0.6 | 0.8 | 7.0±0.2 | 7.98 |
| 3×1.5 | 30/0.24 | 0.7 | 0.9 | 8.3±0.2 | 4.95 |
| 3×2.5 | 49/0.24 | 0.8 | 1.1 | 10.0±0.2 | 19.5 |
| 3×4 | 56/0.29 | 0.8 | 1.2 | 11.5±0.2 | 13.3 |
4 CORE CABLE PHYSICAL AND ELECTRICAL CHARACTERISTICS
| Cross section of conductor(mm²) | Conductor structure(mm) | Insulation thickness(mm) | Sheath thickness(mm) | Approx. cable diameter(mm) | Max resistance of conductor at 20℃ (Ω/km) |
| 4×0.75 | 24/0.19 | 0.6 | 0.8 | 7.2±0.2 | 7.98 |
| 4×1 | 32/0.19 | 0.6 | 0.9 | 7.9±0.2 | 4.95 |
| 4×1.5 | 30/0.24 | 0.7 | 1.0 | 9.3±0.2 | 19.5 |
| 4×2.5 | 49/0.24 | 0.8 | 1.1 | 11.0±0.2 | 13.3 |
| 4×4 | 56/0.29 | 0.8 | 1.2 | 12.6±0.2 | 7.98 |
5 CORE CABLEPHYSICAL AND ELECTRICAL CHARACTERISTICS
| Cross section of conductor(mm²) | Conductor structure(mm) | Insulation thickness(mm) | Sheath thickness(mm) | Approx. cable diameter(mm) | Max resistance of conductor at 20℃ (Ω/km) |
| 5×0.75 | 24/0.19 | 0.6 | 0.9 | 8.1±0.2 | 4.95 |
| 5×1 | 32/0.19 | 0.6 | 0.9 | 8.6±0.2 | 19.5 |
| 5×1.5 | 30/0.24 | 0.7 | 1.1 | 10.3±0.2 | 13.3 |
| 5×2.5 | 49/0.24 | 0.8 | 1.2 | 12.2±0.2 | 7.98 |
| 5×4 | 56/0.29 | 0.8 | 1.4 | 14.2±0.2 | 4.95 |
Testing process
▼ Packing&Delivery:
We are capable of meeting the most strict delivery schedules
according to per purchase order. Meeting the deadline is always the
top priority as any delay in the delivery of cable can contribute
to overall project delay and cost overrun.
Cable is supplied in wooden reels, corrugated boxes and coils.
Cable ends are sealed with BOPP self adhesive tape and
non-hygroscopic sealing caps to protect the cable ends from
moisture. The required marking shall be printed with a
weather-proof material on the outsides of drum according to
customer's requirement.
▼Ordering Options:
For prompt quotation / supplies please make sure your inquiries and
your orders are securing the following data :
1 International or Special Standard. (Alternatively, the precise
usage of the cable.)
2 Rated voltage.
3 Copper or Aluminium conductors.
4 Size of each conductor.
5 Insulation material : PVC XLPE or others.
6 Number and identification of conductors.
7 Other requirements.
8 Packing.
9 Required delivery time.
10 Required validity.
If this all seems a litle too technical for you, then why not get
in touch with us.We look forward to assisting you in identifying
the best products for your specific application and to answer any
questions you might have.
▼ Company information:
30 years of experience in R & D, production and sales of wire and
cable.
Invest 200 million to build a modern industrial park, covering an
area of 65000 square meters.
Annual revenue is about 500 million US dollars.
CNAS laboratory, more than 100 testing reports.
Products are widely used in real estate, municipal, industrial
support, mobile communications etc
