TY150 Stringing Equipemnt Hydraulic Puller For Power Line
Construction
Purposes and characteristic
- This machine is an efficient power construction machine with good
overall performance, high main functional parts configuration, high
power reserve, fast traction speed and wide use.
- This machine is mainly equipped with a small tension machine, used
for the front word display and release of the traction rope, and
can also be satisfied with the traction wire.
- It can meet the traction spread of double split LGJ720 and below in
mountainous and hilly terrain; traction expansion of four split
LGJ-630 and below in flat terrain; traction extension of OPGW or
ADSS in various terrain; and traction rope of 500KV and below.
Performance parameter
| Main technical performance parameter | Max intermittent pulling force: 150 kN Max continuous pulling force: 120 kN Corresponding speed: 2.5 km/h Max continuous tractive speed: 5 km/h Corresponding pulling force: 60 kN |
| Structure parameter | Pulling wheel diameter: 600 mm Groove number: 9 Max diameter of applicable pulling rope: 26 mm Weight: 6600 kg Overall dimension (length*width*height): 4800*2350*2470 mm Hoisting mode: Single point |
Engine
- Type: Cummins 6CTA8.3-C260
- Model: Straight type six-cylinder pressurizing four-stroke diesel
engine
- Cooling method: forced air cooling
- Total air output: 8.3 L
- Max torque: 1135 Nm
- Fuel consumption rate (bench test): 238 g/kw.h
- Rated power (one hour power): 194 kw
- Cylinder diameter * stroke: 114*135 mm
- Rotary speed when maximum torque: 1500 r/min
- Rated speed: 2200 r/min
Auxiliary oilway hydraulic system
Open type quantitative throttling control hydraulic system, gear
pump oil supply, through manual reversing valve, ball valve control
the entire hydraulic system oil cooling, and control winch tail
frame lifting.
- Sleeve extension oil cylinder: 3TG110×250
- Duplex gear pump: 1PF2G2-4X/016+014RR20MRL
- Radiator: B5024
- System working pressure: 12Mpa
- Hoisting motor: J2K-305
- Fan motor: GM5-12-1FE13-S-20
Characteristics:
The puller consists of several parts: engine, closed hydraulic
system, reducer transmission system, pulling wheel, pulling rope
winding mechanism, operating system and main frame.
The main puller and the pulling rope winding mechanism are
integrated.
The whole machine layout is very compact, with reasonable space
location and comfortable operation.
The puller is a hydraulic transmission tractor, using the German
Rexroth hydraulic controlled inclined disc variable pump and the
German Rexroth inclined shaft hydraulic motor, forming a closed
circuit hydraulic transmission system.
Advanced technology, power saving, high transmission efficiency,
reliable quality, and has a self-overload protection function, to
prevent hydraulic impact damage and the acceleration of oil
temperature rise.
Operation and Use
The correct operation and use, carefully maintenance and
maintenance, to make the machine is in the best condition, play a
proper performance and service life, reduce the occurrence of
fault, reduce downtime maintenance time, and reduce the cost, to
create the biggest benefits, so you must master the operation of
the machine and the use method, to avoid unnecessary trouble caused
by improper operation or error and loss.
