Programmable Temperature & Humidity Test Chamber 80 Liters 3
Chambers Type
Application:
Constant temperature humidity test chamber 3 layers type is used
for the product according to the national standards or set
requirements, the user changes in low temperature, high
temperature, temperature and humidity and its circulation
condition, physics and other related characteristics of product
environmental simulation test, test, through testing, to judge the
performance of the products, whether can still meet predetermined
requirement, so that for product design, improve, identification
and factory inspection.
Parameters :
| Model Name | PT-2093 Temperature & Humidity Test Chamber 80L, 3 Chambers Type |
| Inner Cabinet Size | 40*40*50cm(W*D*H), 3 layers |
| Outer Caninet Size | 110*130*218cm(W*D*H) |
| Temperature Range | -20℃ to 100℃ |
| Temperature Fluctuation | ≤±0.3℃ |
Temperature Departure | ≤±2℃ |
| Humidity Range | 30%～98%. |
| Humidity Fluctuation | ≤±2%R.H. |
| Humidity Uniformity | ≤±3% R.H.(at condition ≥75%R.H.) ≤±5% R.H.(at condition<75%R.H.) |
| Heating Time | -20℃→+100℃: 2-3℃/min |
| Cooling Time | +20℃→-20℃: 0.7-1℃/min |
| Test Environment | ambient temperature is +25℃, relative humidity not over than 85%,
and there is no sample in the test chamber |
| Source Of Power Supply | 3 phase 5 line ,AC 380V, 30A |
Meet Standards:
GB/T11158-2008,GB/T10589-2008, GB/T10592-2008, GB/T10586-2006,
GB/T2423.1-2008 Test A, GB/T2423.2-2008 Test B
GB/T2423.3-2006, GB/T2423.4-2008,GB/T2423.22-2002,
IEC60068-2-1:2007
IEC60068-2-2:2007, GJB150.3 ； GJB150.4 ；GJB150.9
IEC68-2-1 Test A； IEC68-2-2 Test B
Structural Features :
1. Insulation envelope
1) Outer wall material: cold rolled steel plate baking paint.
2) Inner wall material: 304 stainless steel.
3) Box insulation material: rigid polyurethane foam.
4) Door insulation material: rigid polyurethane foam.
2. Air Adjust Channel
1)Centrifugal fan of air conditioning channel:
2) Heater, humidifier, evaporator, feed outlet, temperature sensor.
3. Standard Configuration of Test Chamber
- Large Windows 250x330x40mm, 3 vacuum layers;
- Flat explosion-proof handle;
- Door hinge : SUS #304;
- Box lamp (1 philips observation lamp);
- 2 stainless steel SUS #304 grille steel plate shelving (adjustable
up and down, detachable);
- Stainless steel adjustable spacing 40mm shelving 2 sets of track;
- Lead hole x1: 50mm
4. Chabmer Door
- Single door, from right to left, hand on the right side;Full open
door type 3, single open type.
- Equipped with Windows W250Xh330 mm, lighting;
- Window/door frame anti-condensation heating device.
5. Control panel controller display screen, overtemperature
protection setting device
6. Refrigeration unit of mechanical room, water receiving tray and
drainage hole
7. Distribution control cabinet distribution board and exhaust fan
8. Heater heating system: bare wire heating wire heating air
circulation mode
9. Humidifier shallow groove boiler humidification system.
10. Power cord holes and drain holes are located on the back of the
cabinet
Refrigeration system :
1. Working mode mechanical refrigeration.
2. The original refrigeration compressor is imported from France
"Tecumseh" low-temperature and high-efficiency full-density
compressor.
3. Evaporator fin type multi - stage automatic load capacity
adjustment.
4. Condenser air-cooled separation type.
5. Expansion system: volumetric controlled refrigeration system
(capillary).
6. Evaporative condenser stainless steel brazing plate heat
exchanger.
7. The controller of the control system automatically adjusts the
operating condition of the refrigerator according to the test
conditions.
Evaporation pressure control valve.
Compressor return air cooling circuit
8. Refrigerant dupont R404a environmental refrigerant (ozone
depletion index: 0)
Electrical control system :
1. Independently developed control system:
- with 7-inch true color touch screen,
- human-machine friendly interactive interface,
- intuitive display of temperature and humidity.
2. Temperature and humidity controller:
- adopts the original imported microcomputer color liquid crystal
display touch screen direct keystroke type,
- the wide perspective in Chinese and English,
- the temperature and humidity of high contrast function can be
programmed at the same time,
- with 250 groups of program 12500 times memory, each section
520Hour59Min, can be arbitrarily divided and set, and with multiple
groups of PID control functions.
3. Controller Specification :
- Accuracy: temperature ±0.1℃+1digit, humidity ±1%R.H+1digit;
- Resolution: temperature ±0.01℃, humidity ±0.1%R.H;
- Temperature slope :0.1 ~ 9.9 adjustable;
- with upper and lower limit standby and alarm functions;
- Temperature and humidity input signal wet and dry sphere PT100x2;
- 9 sets of P.I.D control parameters were set, and P.I.D calculated
automatically;
- Automatic wet and dry ball correction.
4 . Screen Display Function :
- color painting face to talk, without the need for button input, the
screen directly touch options;
- Temperature and humidity setting (SV) and actual (PV) values are
directly displayed.
- display the current execution program number, segment, remaining
time and cycle times;
- operation cumulative time function;
- The temperature and humidity program setting value is displayed by
graph curve with the function of real-time display program curve
execution;
- With separate program editing screen, at least 5 sections of
temperature, humidity and time can be input per page;
- Chinese and English can be arbitrarily switched;
- Fault prompt screen display;
- The screen can be backlit;
- Screen protection can be set to TIMER, TIMER or manually turn off.
4. program capacity and control function
- Available program groups: up to 100 PATTEN.
- Available memory capacity: a total of 10000 SEGMENTS.
- Repeatable commands: up to 999,999 times per command.
- The production of the program, with editing, cleaning, insertion
and other functions.
- Programmable timing control module device x2 group.
- With the power program memory, after the automatic start and
continue to execute the program function.
- With rs-485 communication interface.
- With USB interface function.
- Program execution can be real-time display graph curve.
- Automatically adjusting the freezing ability.
- Reservation start and shutdown.
- With date, time adjustment function.
- Key and screen LOCK function.
Constant Temperature Humidity Tester Photo :
