35kHz 1000Watts Ultrasonic Spot Welding Machine CE Approved
Equipment
Description:
35K 1000W Ultrasonic Spot Welding Machine ,electronic upgrading of
products, welding requirements for plastic parts is higher and
higher.And ultrasonic welding technology with environmental
protection, energy saving, security, and the advantages of without
adjuvant, adapt to the high demand of electrical and electronic
industry.
Function:
1. Welding:
The welding head vibrating at ultra-high frequency of ultrasonic
wave under the moderate pressure makes the joint surface of the two
plastics generate friction heat and melt fusion at the same time.
The welding strength can be comparable with the body, using
suitable workpiece and reasonable interface design. It can achieve
watertightness and airtightness, and eliminates the inconvenience
caused by the use of auxiliary materials to achieve efficient and
clean welding.
2. Riveting welding:
Ultrasonic ultra-high frequency vibration welding head, pressing
the tip of the plastic product, so that it instantly melts into a
rivet shape, so that the materials of different materials are
mechanically riveted together.
3. Buried:
By means of the trajectory of the welding head and appropriate
pressure, the metal parts (such as nuts, screws, etc.) are squeezed
into the plastic hole and fixed at a certain depth. After
completion, the tension and torque can be comparable. The strength
of the traditional mold forming can eliminate the disadvantages of
the injection mold being damaged and the injection slow.
4. Molding:
This method is similar to the riveting method. The concave welding
head is pressed against the outer ring of the plastic product, and
the ultrasonic hair is ultrasonically shaped and covered by the
ultra-high-frequency vibration of the welding hair to be coated
with the metal object to fix it, and The appearance is smooth and
beautiful, and this method is mostly used in the fixed forming of
electronic type and horn, and the fixing of lenses of cosmetics.
5. Spot welding:
Welding two pieces of plastic points without pre-designing the
welding line to achieve the purpose of welding; for larger
workpieces, it is not easy to design the workpiece of the welding
line for point welding, and the welding effect can be achieved, and
multiple points can be spot-welded at the same time.
Characteristics:
1. Lightweight, easy to carry, easy to operate (portable)
2. More d applications in riveting, forming and welding.
3. Easy to set welding time
4. Equipped with overload protection circuit (voltage, current,
phase, temperature, output)
5. FET power output
6. Automatic resonance
7. Automatically maintain amplitude function
8. Startup: reaches full power at a rate of 105 milliseconds
Application:
1. Airbag
2. Interior
3. Tire Cord
4. Convertible top
5. FVK Automotive
6. Light and sun protection
