100Ah Lithium-Ion Rechargeable Battery
Description and Model:
This product is a new type of backup power supply for the
development of high-tech products,
with integration, miniaturization, light, intelligent,
standardized, environmental protection and other
characteristics, can be widely used in indoor distribution
stations, integrated base stations, marginal
stations, distributed power supply and other fields.
And adopted by the high safety performance, lithium battery cathode
material for lithium iron
phosphate, high safety, high stability, high cycle life, high
specific energy, specific power, low temperature
performance is superior, but large current charge and discharge and
many other advantages, at the
same time, using suitable for communication demand special high
performance battery management
system (BMS), with the charge, over discharge, short circuit,
over-current (load), temperature, flow, total
pressure protection,charging under the secondary electricity,
balanced and various protective functions,
and provides CAN ,RS485 communication interface and the upper
machine to realize remote monitoring,
can be connected to the base station power environmental monitoring
systems,Intelligent software anti-theft
design,Ensure the life of lithium battery and reduce the daily
maintenance work.
Manufacturing standard:
- YDB032-2009 communication backup type lithium ion battery pack;
- YDT - 2011-2344.1 the communication lithium iron phosphate battery
part 1: integrated battery ";
- YDT, 1051-2010" communication board (stand) power system total
technical requirements ";
- YDT - 2005-1363.3 the communication board (station) power supply,
air conditioning and environment centralized monitoring management system "of the relevant standards
Feature:
1. The internal single battery adopts the anode material of lithium
ferrous phosphate (LiFePO4).
(high safety, high energy density and excellent cycling performance);
2. The battery pack is equipped with BMS, a high-performance
battery management system.
(Protection functions of over discharge, over charge, over current,
high temperature and
low temperature to ensure the safety of the battery pack);
3. Automatic charge and discharge management.
4. Alarm function: When the battery voltage is lower than the alarm
value or too low, it will alarm and
automatically power down to protect the battery.
5.The battery pack has good electromagnetic compatibility.
Standard design, low operating environment requirements (can be in
-20 ~ 60℃, humidity < 95%
normal work), small size, light weight, easy installation, simple
maintenance in the later stage, can
save considerable upfront investment and maintenance costs in the
later stage.
Reference:
| NO. | Item | Specification |
| 1 | Operating voltage range | 37.5V~54.75V |
| 2 | Standard charging method | 50A |
| 3 | Maximum continuous charging current | 100A |
| 4 | Standard discharging method | 50A |
| 5 | Maximum
continuous discharge current | 100A |
| 6 | Cycle Life | ≥3000 cycles (0.5C charge ,0.5C discharge)
80%DOD；±25℃ |
| 7 | Operating Temperature | -20℃-60℃ |
| 8 | Storage Temperature | -20℃-50℃ |
| 9 | Communication mode | RS485 |
| 10 | Shipment voltage | ≥48V |
| 11 | Charge retention and
capacity recovery capability | Standard charge the battery, and then put aside at
room temperature for 28d or 55 ℃ for 7d, Charge
retention rate≥90%, Recovery rate of charge≥90 |
| 12 | Designed life | 10 YEARS |
| 13 | Guarantee period | 3 YEARS |
Appearance:
Shipment packaging:
Storage conditions remark:
1.When the battery pack to be long-term stored, charge the battery
pack to about 60% capacity,
store in dry and ventilated place, charge 1h for every 3 months.
2.The battery pack and charger should be stored in clean, dry and
ventilated place, avoid contacting
with corrosive materials and be away from fire and heat.
