48V 200Ah Power Lithium Iron Battery
Description:
This product is a new type of backup power supply for the
development of high-tech products,
with integration, miniaturization, light, intelligent,
standardized, environmental protection and
other characteristics, can be widely used in indoor distribution
stations, integrated base stations,
marginal stations, distributed power supply and other fields.
Feature:
1. Standard design, low operating environment requirements (can be
in -20 ~ 60℃ humidity < 95%
normal work), small size, light weight, easy installation, simple
maintenance in the later stage,
can save considerable upfront investment and maintenance costs in
the later stage.
2. Automatic charge and discharge management. The monitoring unit
automatically measures the
charge and discharge current of the battery and manages the
floating charge and even charge
of the battery;
3. When the battery voltage is lower than the alarm value, it will
alarm, and when the voltage is too
low, it will automatically power down to protect the battery.
Reference:
| NO. | Item | Specification |
1 | Nominal Capacity | 200Ah |
| 2 | Watt Hour | 9600Wh |
| 3 | Standard charging/discharging method | 50A |
| 4 | Maximum continuous charging/discharging current | 100A |
| 5 | Cycle Life | ≥3000 cycles (0.5C charge ,0.5C discharge)80% DOD；±25℃ |
| 6 | Operating Temperature | -20℃-60℃ |
| 7 | Storage Temperature | -20℃～50℃ |
| 8 | Shipment voltage | ≥48V |
| 9 | Designed life | 10 YEARS |
| 10 | Guarantee period | 3 YEARS |
Pre-sale testing:
| NO. | Item | Testing Instruction | Requirement |
| 1 | Vibration Test | Battery will be vibrated 30 minutes in three mutually perpendicular
directions and changing frequency between 10 to 55Hz. The rate of
scanning frequency is from 10 Hz to 55Hz with the rate of 1Hz per
min. Vibration frequency:10-30Hz Amplitude:0.38mm Vibration
frequency:30-55Hz: amplitude:0.19mm | The battery shall not rupture, smoke, explode or leak. Battery
electric voltage ≥48V. |
| 2 | Constant Temperature/ Humidity Test | Keep the battery at 40±2℃ and 90%-95%RH for 48 hrs after complete
charge. After the test, keep the battery at 20±5℃ for 2 hrs. Discharge at
10A constant current discharge to the termination voltage. | Appearance of the battery shall not rust, smoke or explode.
Discharge Capacity ≥80% |
| 3 | High Temperature Performance Test | Keep the battery at a hot oven with 55±2℃ for 2 hrs, then measure
the capacity with constant discharge current 0.5C to discharge
protection point after complete charge. After the test, keep the
battery at 20±5℃ for 2 hrs. | Appearance of the battery shall not rust smoke or explode.
Discharge
Capacity >90%. |
| 4 | Low Temperature Performance Test | Keep the battery at -20±2℃ for 16-24 hrs, then measure the capacity
with constant discharge current 0.5C to discharge protection point after complete charge. After the test, keep the battery at
20±5℃ for 2 hrs. | Appearance of the battery shall not rust, smoke or explode.
Discharge
Capacity >55%. |
Shipment packaging:
Storage conditions:
1.When the battery pack to be long-term stored, charge the battery
pack to about 60% capacity,
store in dry and ventilated place, charge 1h for every 3 months.
2.The battery pack and charger should be stored in clean, dry and
ventilated place, avoid contacting
with corrosive materials and be away from fire and heat.
