Sondex S14 Plate Heat Exchanger Cross Flow Metallurgy Desalination
PHE
S14/S14A Plate Heat Exchanger Construction
S14/S14A Model Plate Heat Exchanger Specification
| Surface Area | 0.14㎡ |
| Plate Theta Angle | 55 ° 125 ° |
| Connection Diameter | 60mm |
| Plate Corrugate Thickness | 2.6 mm |
| Plate Centre Length* Width | 694*126 mm |
| Plate Shape Length*Width | 798*230 mm |
S14/S14A Plate Heat Exchanger Technical Information
| Frame | - Painted frame
- Stainless steel frame, designed for the food and daily industry
- Both frames comes with clamping bolts placed around the frame edge.
|
| Design Pressure | - Painted frames: 1.0/1.5/2.5 Mpa. (145/217/362 PSI)
- Stainless steel frame: 1.0/1.6 Mpa (145/232 PSI)
|
| Intermediate Frames | - Intermediate frames and corner blocks in stainless steel.
|
| Connections | - DN150/6" flange in carbon steel, rubberlined or cladded with AISI
316 or titanium
- DN100/4", DN125/5" and DN150/6" dairy unions
- According to all known standards.
|
| Plate Material | - AISI304/316, 254 SMO and titanium.
- Other materials available on request.
|
| Gaskets | - The gasket is placed in the closed gasket groove, that is formed by
the plates. This design makes the plate suitable for high working
pressures. The plates are strongly guided during the assembly of
the plate heat exchanger. Materials: NBR, EPDM and Viton.
- Other materials available on request.
|
| Extra Equipment | - Safety cover in stainless steel
- Insulating jacket
- Assembling spanner
- Foundation feet for common frame
- Instrument flange
- Thermometer and manometer
|
S14/S14A Plate Heat Exchanger Gasket & Plate Pictures
S14/S14A Frames
| Number of Plates | L(frame length)(mm) | W(mm) | H(mm) | Weigth max,empty(kg) | Connection type |
| S19A IS16 |
| 7-39 | 429 | 300(11.81") | 1044.6(41.13") | 170 | DN50 flang or 2" threaded pipe BSP |
| 40-76 | 629 | 205 |
| 77-150 | 1029 | 277 |
| 151-206 | 1329 | 331 |
| 207-243 | 1529 | 366 |
| 244-336 | 2029 | 455 |
| 337-428 | 2529 | 545 |
| 429-521 | 3029 | 633 |
| S19A IS25 |
| 7-35 | 444 | 300(11.81") | 1044.6(41.13") | 178 | DN50 flang or 2" threaded pipe BSP |
| 36-71 | 644 | 223 |
| 72-142 | 1044 | 314 |
| 143-196 | 1344 | 383 |
| 197-232 | 1544 | 428 |
| 233-321 | 2044 | 542 |
| 322-410 | 2544 | 655 |
| 411-500 | 3044 | 769 |
PHE Plate Feature
| FEATURE | ADVANTAGES | WHAT'S IN IT FOR YOU! |
| A | DISTRIBUTION AREA | Efficient Flow Distribution | - Prevents Mal-Distribution
|
| B | CORRUGATED PLATE PATTERN-HEAT TRANSFER AREA | Promotes Turbulence, Minimize Fouling | - Excellent heat recovery effect
- Maximize run time
|
| C | PLATE LOCKING SYSTEMS | "Corner lock" and " bubble lock" concepts ensure a stable and well
aligned plate pack when the unit is closed | - Safe and economic operation
- High serviceability
- Minimum service downtime
|
| D | EASYCLIP GASKET SYSTEM | Bevelled gasket edges easily clip into place using your flingers Stays securely in place and provides high sealing integrity | - Reliable operation
- Easy and quick to replace
- No special tools needed
|
PHE Gasket Type
Please check their are three common model gasket type are aways
used in Sondex brand.
PHE Plate Type
- Hanging System: Plates feature a reinforced hanging system. The hanging system
helps the plates withstand the powerful tightening force, and
prevents misalignment and corner collapses. This makes plates a
solid investment, as the lifetime of the plates is increased and
service duration is reduced.
- Distribution area: The distribution area on plates is designed to prevent stagnant
zones, and ensures an even distribution of the media across the
entire plate. Furthermore, the pressure drop in the distribution
area is minimal and used on the heat transmission area instead,
which results in better heat transmission efficiency.
- Heat transmission area: With a maximized heat transmission area, we are able to reduce the
total number of plates needed for optimal performance. Our plate
patterns are fine-tuned for each application and provide the best
possible conditions for heat transfer.M&C solutions let you
dial up your efficiency and dial down your energy consumption.
PHE Problem Solving
If you have problems with your plate type heat exchanger, in most
cases these can be solved by your own personnel. Please find below
a summary of possible problems as well as possible causes and
solutions.
A condition for the continuous proper functioning of your plate
type heat exchanger is in strict compliance with the permissible
values for pressure and temperature mentioned on the name plate.
Exceeding these values, even as a short-lasting pressure peaks will
cause damage to the unit and be the cause of problems.
To avoid costly repairs, we advise you to have the installation
work and maintenance carried out by properly trained personnel. You
can also contact us.
| Problem | Possible Cause | Possible Solution |
| Leakage | At the connections | - Check the rubber liners (if fitted)
- Check the flange gasket(if fitted)
- Check the O-ring
- Fit the pipes tension-free
|
| Mixing of primary and secondary circuit | - Check the plates for holes and/or cracks
|
| In plate package | - Check the assembly
- Check the condition of the gaskets
- Check the proper position of the gasket
|
| The operating Conditions deviate from the specification | - Adjust the operating conditions
|
| Insufficient Capacity | Air in the system | - De-aerate the pipe system
- Check the pipe work for possible air traps
|
| The operating conditions deviate from the specification | - Adjust the operating conditions
|
| The heat exchanger is dirty | |
| The connections have been interchanged | |
| Too high pressure drop | Flow large the design flow | |
| Channels in plate(s) blocked | |
| Incorrect measurements | - Check the pressure indicator
|
| Medium deviating from the design | - Addition of for instance anti-freeze will increase the pressure
drop
|
| Air in the system | - De-aerate the pipe system
- Check the pipe work for possible air traps
|
Plate Heat Exchanger Pictures
M&C Heat Parts Company Profile
M&C Heat Parts Co., Ltd is founded in Wuxi, Jiangsu. M&C is
specialized in designing and manufacturing high quality heat
transfer equipment. The range of products comprises plates &
gaskets, plate heat exchangers, gasketed heat exchangers and brazed
heat exchangers. Thus, as one of the few producers worldwide,
M&C offers solutions with optimum thermodynamic designs for
different industries and virtually all applications.
M&C provide you with one-stop accessories service,
multuple-brand & multiple model alternatives for your choice. We'll
meet all your requirements of plate heat exchanger and keep your
machine running contunously through our rich storage and quick
response.
Moreover, we have a strict quality control and after-sales service
system, from material purchasing to finished product package until
the product received in good condition. Our products have been
widely used all over the world in various fields.
M&C Plate Heat Exchanger Plates & Gaskets Other Models
Recommend
Sondex/Danfoss - S4A, S7, S20, S21, S22, S41, S43, S47, S65, S81,
S86, S100, S120, S130, SFD7, SFD13, SW19 and so on;
APV/SPX - H17, N25, N35, A055, A085, J060, J092, J107, M92, M107,
K55, K71, B110, B134, P105, P190, SR1, SR2, TR9GN, TR9AL and so on;
Tranter/Swep - GX12, GL13, GC26, GC51, GX26, GX51, GX42, GX64,
GX85, GX91, GX140, GX145 and so on;
API/Schmidt - Sigma 7, Sigma 9, Sigma 13, Sigma 26, Sigma 27, Sigma
36, Sigma 66, Sigma 106, Sigma 229, Sigma Star 45, Sigma Star 90
and so on;
Vicarb - V4, V13, V20, V28, V45, V60, V100, V110, V130 and so on;
Hisaka - EX11, EX15, EX15, LX026, LX195, LX395, LX595, RX135,
RX395, RX595, UX115, UX225, UX395, UX495, UX815, UX995 and so on;
GEA - VT04, VT10, VT20, VT40, VT80, VT405, VT805, VT1306, NT50M,
NT50X, NT100S, NT150S, NT150L, NT250M, NT250L and so on;
Funke - FP04, FP05, FP14, FP16, FP08, FP22, FP31, FP40, FP41, FP70,
FP100, FP120 and so on;
Thermowave - TL200SS/PP, TL250SS/PP, TL400SS/PP. TL650SS/PP and so
on;
DHP - DX143, DX146, DX20V, DX20DL, DX20DM, DX30S, DX36M and so on;
LHE - HT101, HT102, HT104, HT151, HT152, HT202, HT232, HT233 and so
on;
M&C Plate Heat Exchanger Goods ready to Delivery
