Metalcon Automatically Width Adjustable 40-200mm Stud Track Drywall
Roll Forming Machine
This profile is hot sale in Chile. We export this production lin to
Chile before. It can make C and U shape in one machine. And its
width can be adjustable. This production line includes a 3 ton
decoiler, main roll forming machine, hydraulic punching and
cutting, control box, and a simple stacker.
Stud Track Drywall machine is used to plaster board, gypsum board
and other decorative finishes lightweight board made of
non-load-bearing walls and roof of the building style decoration, a
variety of decorative building roof shape, inside and outside the
building wall and ceiling scaffolding base material.Products made
by this machine are suitable to use in hotels, theaters, shopping
malls, factories, office buildings, old building renovation,
interior decoration settings, roof and other places.
Gypsum Board Drywall Partition Ceiling System Machine is widely is
widely used to produce C U drywall machine, Main c channel
machine,wall angle machine, roof batten machine, T bar machine,
etc.
The C U drywall machine can do material thickness 0.3-1.2mm with
raw material Cold-rolled Steel, Galvanized Coil, PPGI. Also can do
C U size from 40mm to 200mm adjust automatically, just put
different feeding coil width.
The machine includes decoiler, Feeding and Leveling Device, main
forming machine, hydraulic cutting device, the Frequency converter
controls the motor speed, the PLC system controls length and
quantity automatically.
Our produced profile meet ISO, CE , UL standards, and our machine
is applied to steel structure, industry or home.
Technical Parameter
| Items | Specifications |
| Material of coil | Material Thickness | 0.85-1.6mm G550 Galvanized coils |
| Punching device | Hydraulic punching device | 1 set |
| Forming system | Rolling Speed | 10 m/min with driven chain |
| Roller Stations | About 15 stations forming |
| Roller Material | Gcr15 Steel with quenching |
| Shaft Material | 45# Steel Diameter 75mm shaft
|
| Main Motor Power | 7.5 kw |
Cutting
system | Material Of Cutting | CR12 with quench treatment |
| Hardness | HRC58-62 |
| Tolerance | +-1.5mm |
| Cutting blade | 2 sets of cutting blade |
| Electrical control system | Electric Source | 380V, 50HZ,3 phase, according to buyer’s request |
| Control System | PLC with touch screen |
| Weight | About 5 tons |
| Way Of Drive | 1 inch single chain |
| Size of machine | Length 7500mm* Width 800mm* Height 1000m |
Machine List
| 3 tons hydraulic de-coiler | 1 set |
| Main roll forming machine with logo | 1 set |
| PLC Control box | 1 unit |
| Hydraulic cutting device | 1 unit |
| Hydraulic punching device | 1 unit |
| 6 meters Simple auto stacker | 1 unit |
Profile Drawing
Technological process:
Decoiler—feeding with guide—Hydraulic punching—Roll
forming—Cutting—Products collecting
Machine Pictures
