About Vibration Fluid Bed Dryer/CoolerThe vibration of fluid bed drier is caused by vibrating motor.
Materials move forward under certain vibration force and contact
with hot air input from the bottom of drier.
Advantages of FBD/FBC- Suitable for drying, cooling and humidification of products
- High drying efficiency and good energy-saving. It can save more
than 30% energy than a normal drier.
- Less surface damage of materials and is capable of drying
frangible materials. Working effect will not be affected even the
granule is irregular.
- Good adjustability and wide scope of application. The thickness
of material layer, move speed in chamber and the change of total
amplitude can all be step-less regulated.
- Uniform and stable fluidizing, no dead angle and broken out, all
drying, cooling, humidification products are uniform.
- The vibration source is a vibration motor, it has stable running,
convenient maintenance, low noise and long life.
- Fully enclosed working status, cleaning environment.
Application- pressing tablet and granule
- boric acid
- salt
- maleic acid
- edible sugar
- grains
- beans
- seeds
- mineral product
- sand
Draft of Vibration Fluid Bed/Cooler
Technical Parameter
| Model | Bed Area
(m2) | Hot Air-in Temp.
(°C) | Air-out Temp.
(°C) | Water Evaporation
(kg/hr) | Motor Power(KW) |
| ZLG4.5x0.3 | 1.35 | 70-140 | 40-70 | 35-50 | 0.8x2 |
| ZLG6 x 0.45 | 2.7 | 70-140 | 40-70 | 80-100 | 1.5x2 |
| ZLG6 x 0.75 | 4.5 | 70-140 | 40-70 | 120-140 | 2.2x2 |
| ZLG7.5 x 0.75 | 5.625 | 70-140 | 40-70 | 150-180 | 3.0 x2 |
| ZLG7.5 x 1.2 | 9 | 70-140 | 40-70 | 200-260 | 3.7 x2 |
